How to Change Light Bulb in Globe Fixture

Globe fixtures are a type of light fixture that is often used in homes. They are typically round or globe-shaped and have multiple bulbs that emit light. Replacing a light bulb in a globe fixture can be tricky, but it is not difficult once you know how to do it. In this blog post, we will show you how to change light bulb in globe fixture. We will also provide some tips for making the process easier. Let’s get started.

Summary: In order to change a light bulb in a globe fixture, first remove the light bulb holder by unscrewing it. Next, unscrew the light bulb. Finally, replace the light bulb with a new one.

How to Change Light Bulb in Globe Fixture

Things You’ll Need

  1. A ladder or step stool
  2. A screwdriver
  3. New light bulbs (the same type and wattage as the old ones)

15 Ways How to Change Light Bulb in Globe Fixture

1. Turn Off the Power

To begin, switch off the power to your globe light fixture. You can do this by flipping the switch that controls the light fixture, or by turning off the circuit breaker that supplies power to the fixture. Once the power is off, you can proceed to the next step. If you are unsure of which switch or breaker controls the fixture, you can turn off all power to the home at the main breaker box.

Turn Off the Power

2. Remove the Glass Shade

To remove the glass shade from the fixture, first unscrew the metal ring that is holding it in place. Once the ring is removed, you can lift the shade off of the fixture. If the shade is stuck, you may need to tap it with a rubber mallet to loosen it gently.To remove the glass shade from the fixture, first unscrew the metal ring that is holding it in place. Once the ring is removed, you can lift the shade off of the fixture. If the shade is stuck, you may need to tap it with a rubber mallet to loosen it gently.

3. Remove the Bulbs

Now that the shade is off, you can access the light bulbs. To remove a bulb, simply unscrew it from the socket. Be sure to hold onto the bulb as you unscrew it, as it may be hot. Use a cloth or glove to protect your hand if necessary. You can try gently tapping the bulbs with a rubber mallet if the bulbs are stuck. To insert a new bulb, hold the light bulb by its base and screw it into the socket. Be sure not to touch the glass of the bulb with your fingers, as this may shorten the lifespan of the bulb. Make sure that the light bulb is firmly in place before returning the shade.

4. Screw in the New Bulbs

Once the old bulbs have been removed, you can screw in the new ones. Be sure to use the same type and wattage of the bulb as the old ones. When screwing in the new bulbs, be careful not to over-tighten them. If they are too tight, they may break when you turn on the power.

Old Bulbs Removed

5. Replace the Globe Shade

After you put in the new light bulbs, you can screw the metal ring back onto the globe shade. Be careful not to over-tighten the ring, or you might break the shade. If the shade is hard to put back on, you can try tapping it gently with a rubber mallet.

6. Turn On the Power

Finally, you can turn the power back on to the globe fixture. To do this, simply flip the switch that controls the light fixture, or turn on the circuit breaker that supplies power to the fixture.

Turn the Power  Back on

7. Test the Bulb

Once you have changed the bulb, it is a good idea to test it to make sure it is working. Once the power is on, the globe fixture should be operational. If the bulb does not turn on, you may need to check the bulbs to make sure they are screwed in correctly. If they are, you may need to replace the bulbs with new ones.

How Much Does It Cost To Change A Light Bulb?

The cost of changing a light bulb will depend on the bulb type and wattage. For example, low-wattage bulbs, such as LED bulbs, will cost less to change than high-wattage bulbs, such as incandescent bulbs. The type of fixture will also play a role in the cost of changing the light bulb. Globe fixtures are typically less expensive to change than other types of fixtures. Normally, it will cost between $5 and $10 to change a light bulb in a globe fixture.

How Long Does A Bulb Last?

The lifespan of a light bulb depends on the type of bulb and how much power it uses. Low-power bulbs, like LED and CFL bulbs, will last much longer than high-power bulbs, like incandescent bulbs. How often you use your light fixture will also affect how long the bulb lasts. Normally, a low-power bulb will last between 10,000 and 25,000 hours. A high-power bulb will last between 1,000 and 2,000 hours.

Cfl Bulbs

Tips and Warnings on How to Change Light Bulb in Globe Fixture


  1. Use a clean cloth to avoid leaving fingerprints on the new light bulb.
  2. Insert the new light bulb into the socket and screw it in clockwise until it is tight.
  3. Push the globe back onto the fixture and screw it in place.
  4. Be sure to dispose of the old light bulb properly.


  1. Do not touch the new light bulb with your bare hands. The oil from your skin can cause the light bulb to break.
  2. Be careful not to drop the new light bulb. It may shatter if it hits the ground.
  3. Do not over-tighten the new light bulb. It may break if it is screwed in too tightly.
  4. Do not use a damaged light bulb. It may cause a fire if it breaks while in the socket.
  5. Do not use a higher wattage light bulb than recommended for the fixture. This can cause a fire.
  6. Do not look directly at the light bulb while it is on. The bright light can damage your eyes.
  7. Be sure to turn off the power to the fixture before changing the light bulb. Failure to do so could result in electrical shock.
  8. Do not use any type of spray cleaner on the light bulb or fixture. The chemicals can damage the finish and cause the glass to break.
  9. If the globe is difficult to remove, do not force it. The screws may strip and the globe could break.

How to Prevent Your Light Bulbs From Burning Out

You can do a few things to prevent your light bulbs from burning out prematurely. First, be sure to use the correct wattage bulb for your fixture. Second, do not use spray cleaners on the light bulbs or fixtures. Third, be sure to clean the light bulbs and fixtures regularly to prevent dirt and dust from buildup. Finally, do not touch the light bulbs with your fingers, as this can cause them to burn out prematurely. If you follow these tips, you can help extend the life of your light bulbs and prevent them from burning out prematurely.

Frequently Asked Questions

Can You Put Led Bulbs in a Globe Light?

There are a few things to keep in mind when installing LED bulbs in globes. First, the globes must be round so that the light can reach all angles. Second, the wire connecting the LED bulb to the globe must be extremely thin so that it does not cause interference with the light output. Finally, make sure the LED bulb is placed in the center of the globe and orient it so that its light shines down onto the center of the flame.

What Are Globe Lights Called?

Globe lights are also known as holiday lights, Christmas lights, ornaments, or holiday candles. They are typically made from plastic and are decorated with colorful lights that are often set to resemble an actual globe or star. They are typically used to decorate homes during the holiday season, and can be used to create a festive atmosphere in any room. Globe lights can also be used to add a touch of elegance and sophistication to a room, and can be used as part of a holiday decorating theme or as a standalone decoration.

What Are the Two Types of Light Globes?

There are two main types of light globes: incandescent and fluorescent. Incandescent light globes use a hot filament to produce light, while fluorescent light globes use a small amount of electricity to produce light.

Is Led Globes Better?

The efficacy of LED globes varies depending on a variety of factors, including the type of light they emit, their distance from the viewer, and their design. Some users believe that LED globes are more efficient than traditional globes because they consume less energy and produce fewer heat levels, which makes them easier on the eyes. Others feel that LED globes do not provide as rich a visual experience as traditional globes, and that they can be distracting when used in large groups or inside brightly-lit environments. Ultimately, it is up to the individual to decide whether they prefer LED globes over traditional globes.


Although it is a simple process, changing a light bulb in a globe fixture can be tricky. You could break the globe or the socket if you are not careful. In this post, we have provided step-by-step instructions on how to change light bulb in globe fixture safely and easily. Follow these tips, and you will be able to change that light bulb like a pro. If you have any questions or concerns, please feel free to leave a comment below. Thanks for reading.

Photo of author

Dave Parker

Hi there, my name is Dave. I am 32 years old guy and had a fascination with lighting ever since I knew about LED lighting and strip lights. I have completed my bachelor's degree in electrical engineering and can understand the often complex topics in the field of LED technology. Lightow is where I share my findings, opinions, and recommendations. I hope this tips will enlighten you to the wonderful world of lighting!

Leave a Comment