How to Install Led Lights in Car Exterior

LED lights are a popular choice for car exterior lighting because they are energy efficient and long-lasting. However, if you are thinking of adding LED lights to your car, there are a few things you need to know before you begin the installation process. This blog post will walk you through how to install led lights in car exterior. We will also provide some tips on how to get the best results. So, if you are ready to add some extra style and visibility to your car, keep reading!

Summary: In this blog post, we will show you how to install led lights in your car’s exterior. The installation is simple and can be done by anyone with basic DIY skills. You will need a few supplies, including led lights, wire, and a screwdriver. We recommend using high quality led lights, as they will last longer and provide better illumination.

How to Install Led Lights in Car Exterior

What Causes Led Lights to Flicker

One of the most common complaints about LED lights is that they flicker. This can be extremely annoying, and it can even cause headaches in some people. There are several reasons why LED lights flicker; we will review those now. The first reason is that the power supply to the LED lights is not constant. When the power supply fluctuates, it can cause the LED lights to flicker. The second reason is that the LED lights are not getting enough power. If the LED lights are not getting enough power, they will flicker.

The third reason is that the LED lights are not getting enough cooling. LED lights produce a lot of heat, and if they are not properly cooled, they will flicker. Another reason why LED lights flicker is that they are not getting a proper ground connection. If the ground connection is not good, the LED lights will flicker. Finally, if the LED lights are not getting a proper signal from the controller, they will flicker.

Why Should You Install Led Lights in Your Car

There are many reasons why you should install LED lights in your car. The first reason is that LED lights are much brighter than traditional halogen lights. This means that you will be able to see better when you are driving at night. LED lights also consume less power than traditional halogen lights. This means that you will save money on your car’s battery life. LED lights also have a longer lifespan than traditional halogen lights. This means you will not have to replace your car’s exterior lights often.

Another reason to install LED lights in your car is that they are much more stylish than traditional halogen lights. LED lights come in various colors, and you can even get them in different shapes. This means that you can really customize the look of your car’s exterior. Finally, LED lights are much safer than traditional halogen lights.

This is because LED lights do not produce as much heat as halogen lights. This means there is less of a chance that your car will catch on fire if you have an LED lightbulb.

Led Lights Come in Various Colors

Step by Step How to Install Led Lights in Car Exterior

1. Find a Good Location

The first step is to find a good location for your LED light. You want to ensure that the light will not be in the way of anything and that it will be in a place where it can be easily seen. Avoid placing the light near any moving parts, as this could cause the light to break. The best place for an LED light is on the front of the car, near the grill.

2. Measure the Distance

Next, you will need to measure the distance from the light location to the battery. This is important so that you know how long of a wire you will need. It is also important to know this so that you can place the light in the correct location. To measure the distance, First, find the location of the battery. Second, measure the distance from the front of the car to the back of the car.

Finally, measure the distance from the side of the car to the other side of the car. If you have a tape measure, you can use that. Otherwise, you can use a piece of string and then measure it with a ruler.

3. Choose the Right Wire

Now that you know how long of a wire you need, it is time to choose the right wire. There are two types of wire that you can use for this project: stranded wire and solid core wire. Stranded wire is made up of a bunch of small wires that are twisted together. This type of wire is very flexible, which makes it easy to work with. However, stranded wire is not as durable as solid core wire. Solid core wire is made up of one large piece of wire.

This type of wire is very strong but not as flexible as stranded wire. When choosing a wire, you want to ensure that it is thick enough to handle the current flowing through it. A good rule of thumb is to choose a wire of at least 18 gauge.

4. Drill a Hole

The next step is to drill a hole in the car for the wire. You want to drill the hole in a place where it will be hidden but still accessible. A good place to drill the hole is behind the headlight. This way, the wire will be hidden, but you can still get to it if you need to. To drill the hole, first, use a drill bit that is slightly smaller than the wire. Second, drill a hole in the car. Finally, use a file to enlarge the hole so that the wire can fit through it.

Drill a Hole in the Car

5. Install the Led Light

Now, it is time to install the LED light. First, take the wire and feed it through the hole that you drilled in the car. Next, strip the ends of the wire. Then, twist the two wires together. Finally, screw the LED light into the place where you want it. If the light does not have screws, you can use double-sided tape to secure it in place. Avoid using glue, as this could make it difficult to remove the light later on.

6. Attach the Wire to the battery

The next step is to attach the wire to the battery. First, find the positive and negative terminals on the battery. The positive terminal will usually be marked with a “+” sign. The negative terminal will usually be marked with a “-” sign. Second, attach the wire to the correct terminal. If you are unsure which terminal is which, consult your car’s owner’s manual.

Finally, use electrical tape to secure the connection. You can use a wire connector if you do not have the electrical tape.

7. Test the Led Light

Now, it is time to test the LED light. First, turn on the power to the light. Next, turn on the car’s headlights. Finally, walk around to the front of the car and ensure the light is working. If the light is not working, check the connection between the wire and the battery. If the connection is good, then the light may be defective. In this case, you will need to replace the light.

Test the Led Light

8. Adjust the Lights

If the light is working, then you will need to adjust it. First, turn on the car’s headlights. Next, use a Phillips screwdriver to adjust the light. Turn the screw clockwise to make the light brighter and counterclockwise to make the light dimmer. Finally, turn off the headlights and enjoy your new LED light!

9. Install the Controller

If you are using a controller, the next step is installing it. Most controllers will come with instructions on how to install them. Generally, you will need to mount the controller in a convenient location. Then, you will need to connect the wires from the controller to the LED lights. Finally, you must connect the controller to the car’s battery.

10. Enjoy Your New Led Lights!

Now that you have installed your new LED lights, you can enjoy them! These lights will make your car look great and improve your visibility when driving at night. If you ever have any light problems, consult your car’s owner’s manual or a professional mechanic.

You Can Check It Out To Extend Led Strip Lights

How Much Does It Cost To Install LED Lights In A Car?

The cost of installing LED lights in a car will vary depending on the type of lights you choose and the number of lights you want to install. Generally, you can expect to spend between $50 and $100 on the lights themselves. If you are hiring someone to install the lights for you, then you can expect to pay an additional $50 to $100 for labor. Therefore, the total cost of installing LED lights in a car can range from $100 to $200.

You Can Check It Out To Install Amber Lights

Installing Led Lights in a Car Will Vary

Frequently Asked Questions

Can You Put Leds on the Outside of Your Car?

Yes, you can put LEDs on the outside of your car. While they may not be as bright as traditional headlights, they are more visible at night and can improve safety when driving. LED lights also last longer than regular headlights, so you will save money in the long run.

Is It Hard to Install Led Lights in Car?

Not at all! In fact, installing led lights in a car can be quite simple and straightforward. All you need is some basic knowledge about wiring and soldering, along with the right tools. And if you don’t have any prior experience with this kind of work, there are many online tutorials that can help guide you through the process step by step.

First thing first: disconnect your battery cables to your headlights. Next, find your headlight sockets (usually located near the front or back of your vehicle) and remove the coverings protecting them. You will now see two metal plates – these are where you will install your led lights. Make sure the bulbs are facing down towards the ground when installing them so they don’t glare in people’s eyes while driving at night time. Once installed, reattach everything including connectors, and tighten bolts to appropriate levels using a wrench/spanner as per the manufacturer’s instructions. Tip: If replacing existing halogen headlight bulbs with LED ones (as opposed to upgrading from one type of bulb to another), make sure that both units use compatible connectors by checking their compatibility chart before buying.

What Color Lights Can I Have on My Car?

There are many different colors that car lights can be, and it really depends on what you’re looking for. Some popular colors include red, blue, green, amber, and white. However, the colors you choose should be coordinated with the rest of your car’s design so that everything looks cohesive.

If you’re not sure what colors would look good on your car, you can contact a car accessories store in your area to get some help. They will be able to recommend some colors that will look great and make your car stand out from the crowd.

Why Are My Leds Not Sticking?

There are a few potential causes for why your LEDs might not be sticking, and the most common is that they may need to be replaced. When electronic devices are turned off or when the power goes out, some of their components can become damaged. This includes things like diodes (light-emitting semiconductor materials), transistors, electrolytic capacitors, and other circuitry.

If you notice that one or more of your LEDs seems to have stopped working altogether, it’s probably time to replace them. Depending on the model and brand of your device, this could range from a relatively simple task like popping open the back cover and replacing batteries to something much more involved involving soldering wires directly or removing everything from inside the casing in order to access electrical connections. Whichever route you choose, make sure to consult with an experienced technician so that all damage is properly repaired before using your device again!

You Can Check It Out To Wire Interior Led Lights in Car

Conclusion

So there you have it! These are the steps on how to install led lights in car exterior. By following these steps, you can easily add some style to your car and improve your visibility when driving at night. Be sure to consult your car’s owner’s manual before beginning any work on your car. Also, if you are ever unsure about anything, be sure to consult a professional mechanic. Thank you for reading, and good luck!

Photo of author

Dave Parker

Hi there, my name is Dave. I am 32 years old guy and had a fascination with lighting ever since I knew about LED lighting and strip lights. I have completed my bachelor's degree in electrical engineering and can understand the often complex topics in the field of LED technology. Lightow is where I share my findings, opinions, and recommendations. I hope this tips will enlighten you to the wonderful world of lighting!

Leave a Comment