How to Remove Globe From Pendant Light

If you’re like me, you have many of these old-school Globe light fixtures lying around, just taking up space. And if you’re anything like me, you have no idea how to get the Globe off the fixture. This blog post is for those people. Today I’m going to teach you how to remove globe from pendant light. It’s not as difficult as it seems. So read on and learn how to do it yourself.

Summary: If you’re ever stuck with a globe pendant light that you can’t remove, there’s a simple solution! Just use a sharp knife to cut around the globe until it comes loose. Then, simply remove it from the light fixture.

How to Remove Globe From Pendant Light

What Causes a Stuck Globe?

There are a few reasons why your Globe might be stuck on the light fixture. The first possibility is that the Globe is screwed on too tight. Over time, the screws can become stripped and difficult to remove. The second possibility is that a metal clip holds on the Globe. These metal clips can rust and become difficult to remove. The third possibility is that the Globe is simply old and has fused to the light fixture. Finally, a plastic ring may hold on the Globe. These plastic rings can break and become difficult to remove.

Why You Should Remove the Globe

There are a few reasons why you might want to remove the Globe from your light fixture. The first reason is that you want to change the Globe. Maybe you want to change the light’s color or upgrade to a newer, more energy-efficient Globe. The second reason is that you want to clean the Globe. Over time, dust and dirt can build up on the surface of the Globe, making it difficult to see through. The third reason is that you want to replace the light bulb. If the light bulb burns out, you’ll need to replace it. And the only way to do that is to remove the Globe. You’re in luck if you don’t know how to do that. This blog post will teach you how to remove the globe from the pendant light.

More Energy Efficient Globe

Things You’ll Need

  • A screwdriver
  • A drill
  • A hammer
  • A pair of pliers
  • A new Globe (optional)
  • A new light bulb (optional)

15 Ways How to Remove Globe From Pendant Light:

1. Turn Off the Power

Before you do anything, be sure to turn off the power to the light fixture. Otherwise, you could get electrocuted. To do that, find the circuit breaker box and flip the switch for the light fixture. If you can’t find the switch, flip the switch for the entire room.

2. Remove the Screws

To remove the Globe from the fixture, first turn off the power. Then, remove the screws that hold the Globe in place. There are usually two or three screws, depending on the size of the Globe. Use a screwdriver to remove the screws. If the screws are stripped, you may need to use a drill to remove them.

Use a Screwdriver to Remove the Screws

3. Remove the Metal Clip

If a metal clip holds on the Globe, you’ll need to remove that before you can remove the Globe. Use a hammer to tap the clip until it comes loose gently. Then use a pair of pliers to pull the clip off the light fixture. If the clip is rusty, you may need to use a drill to remove it.

4. Remove the Plastic Ring

If there is a plastic ring around the Globe, you will need to remove it before taking the Globe off. You can use a small screwdriver or another sharp object to pry the ring off. Be careful not to scratch the Globe. If the ring is broken, you may need to use a pair of pliers to remove it.If there is a plastic ring around the Globe, you will need to remove it before taking the Globe off. You can use a small screwdriver or another sharp object to pry the ring off. Be careful not to scratch the Globe. If the ring is broken, you may need to use a pair of pliers to remove it.

5. Use a Drill

If the Globe is screwed on too tight or the screws are stripped, you may need to use a drill to remove them. Be careful not to damage the surrounding metal. To do this, first, drill a small hole in the center of the Globe. Then, use a larger drill bit to enlarge the hole. Finally, use a screwdriver to remove the screws.

Drill a Small Hole

6. Use a Hammer

To remove a metal clip or plastic ring holding the globe in place, gently tap it with a hammer until it comes loose. Be careful not to damage the globe. You may then need to use a pair of pliers to remove the clip or ring.

7. Use a Pair of Pliers

If the Globe is held on by a metal clip or a plastic ring, you may need to use a pair of pliers to remove it. First, try to unscrew the retaining ring by turning it counterclockwise. If the ring is stuck, you can use a pair of needle-nose pliers to grip the ring and twist it off gently.

8. Remove the Globe

Once you’ve removed the screws, metal clip, or plastic ring, you can finally remove the Globe. Be careful not to drop it. If the Globe is dirty, you can clean it now or wait until you’ve installed the new Globe. To clean the Globe, wipe it down with a soft cloth and some soapy water. You’ll need to replace the Globe if it is cracked or damaged.

9. Grab the Globe With Your Hands

If the Globe is small, you may be able to remove it with your hands. Grab the edge of the Globe and pull it down. If the Globe is too large or too heavy, you may need to use a tool to help you remove it.

10. Replace the Light Bulb (Optional)

Now is the time to do it if you’re replacing the light bulb. To do that, unscrew the old light bulb and screw in the new one. Be careful not to touch the new light bulb with your bare hands, as the oil from your skin can shorten the bulb’s lifespan.

Replace the Light Bulb

11. Replace the Globe (Optional)

If you’re replacing the Globe, now is the time to do it. Start by unscrewing the small metal ring (called a “coupling nut”) that holds the Globe in place. You may need a small screwdriver or a knife to help with this. Once the coupling nut is removed, the Globe should easily pull off. You can try wiggling it or tapping it with a screwdriver handle to loosen it if it’s stuck. To put the new Globe in place, reverse the process. Start by screwing on the coupling nut, then push the Globe back into place. Ensure the Globe is seated properly and that the coupling nut is screwed on tight.

12. Turn on the Power (Optional)

After replacing the light bulb and the Globe, you can now turn on the power to the light fixture. Be careful not to touch the light bulb or the Globe with your bare hands, as they may be hot. If everything is working properly, the light should come on. If not, you may need to check the connections or consult an electrician.

How Much Does It Cost to Remove a Globe From a Pendant Light?

The cost of removing a globe from a pendant light will depend on the type of globe, the type of light, the tools needed, and the project’s complexity. Generally, you can expect to pay anywhere from $5 to $50 for this project. If you need to hire an electrician, the cost will be higher.

Tips and Warnings on How to Remove Globe From Pendant Light

Tips:

  1. Be sure to have a secure grip on the globe before attempting to remove it.
  2. Use a step ladder or stool if necessary to reach the globe.
  3. Hold the globe’s base with one hand while loosening the retaining ring with the other hand.
  4. Carefully lower the globe down and away from the pendant light.
  5. Wipe the inside of the globe and the pendant light with a clean, dry cloth before replacing the globe.

Warnings:

  1. Do not attempt to remove the globe if it is hot. Instead, wait for it to cool down first.
  2. Be careful not to drop the globe when removing it from the pendant light.
  3. Do not use sharp objects to remove the globe from the pendant light. This could damage the globe or the pendant light.
  4. Make sure that the new globe is the same size and shape as the old one before replacing it.
  5. Do not overtighten the retaining ring when replacing the globe. This could damage the globe or the pendant light.

If you follow these tips and warnings, you should be able to remove the globe from your pendant light safely.

Frequently Asked Questions

Can You Change Globes on Light Fixtures?

Some light fixtures come with an adjustable arm that allows you to move the globe around, while others require professional installation. In either case, if your globe is broken or disconnected, changing it may be easier said than done.

Some people try to fix globes by using epoxy or superglue, but this approach is often unsuccessful and can even damage the fixture. Another option would be to contact a specialist who could replace the entire light fixture with a new one that includes a globe. However, do keep in mind that this will likely cost more than just replacing the Globe alone.

What is the Glass on a Pendant Light Called?

The Glass on a Pendant Light is often called the Tiffany Lamp. Named after Louis Comfort Tiffany, who first created it in 1892, this lamp is made up of two pieces: a large glass disc that hangs from the neck of a metal or ivory pendant and smaller rounds of clear glass that sit within the disc.

The light fixtures were popular during the late 1800s and early 1900s as they allowed for an ambient glow without having to use candles or lamps with shades. They also had a sleek look that set them apart from traditional chandeliers or lights.

Today, these lamps are still very popular and can add just the right amount of elegance to any space. You can find them in many different styles and colors, so no matter what your preferences may be, there’s likely to be a version available that suits you perfectly!

Are Pendant Lights Standard Size?

When it comes to pendant lights, there is no one “standard” size. That said, most pendant lights are typically about 24 inches in length and 10-12 inches in width. If you would like your light to be a little bit longer or wider, simply select the appropriate option when ordering.

Conclusion

This article has provided a step-by-step guide on how to remove the globe from a pendant light. So there you have it. Removing the globe from a pendant light is possible if you have the right tools and are willing to put in a little effort. Follow these simple steps, and you’ll be able to change your light fixture without having to call in a professional. Have you tried this project before? What challenges did you encounter? Let us know in the comments below.

Photo of author

Dave Parker

Hi there, my name is Dave. I am 32 years old guy and had a fascination with lighting ever since I knew about LED lighting and strip lights. I have completed my bachelor's degree in electrical engineering and can understand the often complex topics in the field of LED technology. Lightow is where I share my findings, opinions, and recommendations. I hope this tips will enlighten you to the wonderful world of lighting!

Leave a Comment