How to Replace RV Light Fixtures

Replacing RV light fixtures can be a daunting task, but it can be a breeze with the right steps. In this blog post, we’ll walk you through the process of replacing an RV light fixture and show you how to replace RV light fixtures. So whether your fixture is broken or just outdated, read on for the steps to take to get it replaced in no time!

Summary: Replacing RV light fixtures is a straightforward task that can help enhance the appearance and functionality of your RV’s interior. The process may vary depending on the specific type and design of the light fixture, but generally involves the removal of the old fixture, followed by the installation of the new one. Before starting, gather the necessary tools and materials, such as a screwdriver, wire stripper, wire nuts, a voltage tester, and the replacement light fixture. Ensure your safety by disconnecting the RV’s power source or turning off the circuit breaker for the area where you will be working.

Begin by carefully removing the old RV light fixture, which typically involves unscrewing any mounting screws or clips that hold the fixture in place. Once the fixture is detached, gently pull it away from the surface to expose the wiring connections. Use a voltage tester to ensure that there is no live current in the wires before proceeding. Disconnect the wires by unscrewing the wire nuts or loosening any other connectors that secure them together. With the old fixture removed, prepare the new light fixture by stripping approximately 1/2 inch of insulation from the ends of the wires, if necessary.

Connect the wires from the new light fixture to the corresponding wires in the RV, typically matching color to color (e.g., black to black, white to white). Secure the connections with wire nuts or other connectors, ensuring they are tight and well-insulated. Carefully tuck the connected wires back into the mounting area and attach the new light fixture to the surface using the provided screws or clips. Finally, restore power to the RV and test the new light fixture to ensure proper function. By following these steps, you can successfully replace RV light fixtures and improve the lighting and ambiance of your RV’s interior.


How to Replace Rv Light Fixtures

What Is an RV Light Fixtures?

RV light fixtures are a type of light fixture specifically designed for use in recreational vehicles. Unlike traditional light fixtures, RV light fixtures are more durable and weather-resistant. They are also often equipped with built-in daytime running lights and automatic turn signals.

While RV light fixtures are not required by law, they can be valuable to any RV. They provide better visibility during nighttime driving, but they can also help make your RV more visible to other motorists. So if you’re looking for a way to improve the safety and visibility of your RV, consider investing in a set of RV light fixtures.

Why Should You Replace Rv Light Fixtures?

If you own an RV, you know how important it is to keep everything in good working order. After all, your RV is your home away from home. So, when it comes time to replace your light fixtures, why settle for anything less than the best? There are many reasons to replace your RV light fixtures with new ones.

There are several benefits to upgrading the light fixtures in your RV. First, it can give your RV a fresh, new look. Second, better lighting can make it easier to see inside your RV at night. Third, more energy-efficient fixtures can help save you money on your electric bill.

Finally, they can add value to your RV if you ever decide to sell it. So, when it comes time to replace your RV light fixtures, choose wisely.

Required Materials

  • Replacement light fixture
  • Phillips head screwdriver
  • Voltage tester
  • Pliers
  • Wirecutter/stripper

How to Replace Rv Light Fixtures Step by Step Guide

Step 1: Determine

There are several light fixtures, and each one is attached differently. The most common type of light fixture is the canister light. These lights have a round base that mounts to the ceiling and extends down. The light bulb is screwed into the socket in the fixture’s center.

Screwed Into the Socket

Another type of light fixture is the recessed light. These lights are also mounted to the ceiling, but they have housing inside the ceiling. The light bulb is attached to the housing and extends down into the room.

If you are not sure what type of light fixture you have, take a look at the existing fixtures in your RV. Note how they are attached and how the light bulbs are positioned.

Step 2: Remove the Old Fixture

Once you have identified the type of light fixture, you can begin to remove it. First, turn off the power to the RV at the breaker box. This will ensure that you do not get electrocuted while working on the light fixtures.

For canister lights, unscrew the light bulb from the socket. Then, use a screwdriver to remove the screws that hold the fixture in place. Next, gently pull the fixture down from the ceiling.

For recessed lights, remove the light bulb from the housing. Then, unscrew the housing from the ceiling.

Step 3: Install the New Fixture

With the old fixture out of the way, it’s time to install the new one. Start by connecting the black wires, then do the same with the white wires. Once both are connected, screw in the lightbulb (if applicable) and secure the new fixture in place. Here is how:

Install the New RV Light

Recessed Light:

Recessed lights have four wires: black (hot), white (neutral), green (ground), and yellow (safety/grounding) wires. The black and white wires will be connected to the corresponding wires in your ceiling, while the green and yellow ones will be connected.

To install a recessed light, start by removing the old fixture (if applicable). Next, connect the black wires and do the same with the white wires. Once both are connected, screw in the new lightbulb and secure the new fixture in place.

Canister Light:

Most canister lights have three wires: black (hot), white (neutral), and green (ground). You will also need a small Phillips head screwdriver.

To install, first, twist the green ground wire around the green or bare copper ground wire coming out of the electrical box. Ensure the connection is tight, so there is no chance of the wires coming undone and causing a short.

Next, connect the black hot wire from the light to the black wire(s) in the electrical box. You may have more than one black wire in the box, which is fine. Just twist them all together and make sure they are tight.

Finally, connect the white neutral wire from the light to the white wires in the electrical box. Again, you may have more than one white wire, which is no problem. Just twist them all together until they are tight.

Step 4: Test the New Fixture

Turn on the Power

Once the new fixture is installed, turn on the power to the RV and test out the new light. If everything is working properly, you should be all set! If you have any issues, check your connections and troubleshoot as needed.

Step 5: Call a Professional

If you’re not comfortable working with electricity or unsure how to install the new light fixture, it’s always best to call a professional. They will be able to help you select the right fixture and ensure that it is installed properly.

Improperly installed light fixtures can be a fire hazard, so it’s important to ensure they are done correctly. However, if you have any doubts, it’s always better to be safe than sorry!

You can easily replace an old or damaged RV light fixture with some basic knowledge and a few tools. Just be sure to take all the necessary safety precautions and call a professional if you’re unsure. With a little effort, you can have your RV looking and feeling like new in no time! Keep reading for more information about how to replace rv light fixtures.

Can I Replace Rv Light Fixtures?

Yes, you can replace RV light fixtures! Replacing light fixtures is a great way to personalize your RV and give it a unique look. However, a few things to keep in mind when replacing RV light fixtures.

First, make sure that the new fixtures are compatible with your RV’s electrical system. Second, pay attention to the size and shape of the new fixtures, as they will need to fit into the existing openings in your RV.

Finally, secure the new fixtures firmly in place, so they don’t come loose while driving down the road. With careful planning, replacing RV light fixtures is a simple and fun project that will give your RV a whole new look.

Replace RV Light Fixtures

How Do I Convert My Rv Lights to Led?

The first step is to remove all of the old light bulbs and fixtures. Next, clean the sockets and fixtures with a degreaser to remove any built-up grime. Once they are clean, you can begin installing the new LED lights. Start by attaching the adapter plate to the socket, then screw in the new LED light.

Repeat this process for each light in your RV. When you are finished, please turn on the RV’s power and test the new lights to ensure they are working properly.

With a few simple steps, you can easily convert your RV’s lights to LED and enjoy improved visibility and energy efficiency on your next camping trip. If you want to know more about how to replace rv light fixtures, keep reading.

How Do You Replace Ceiling Lights in An Rv?

Replacing ceiling lights in an RV isn’t as difficult as you think. With a few simple tools and a little know-how, you can have your RV looking bright and welcoming in no time. The first step is turning off the RV’s power at the breaker box. Once the power is off, you’ll need to remove the old light fixture. This is usually just a matter of unscrewing a few screws or nuts.

With the old fixture out of the way, you can install the new one. Again, this is usually just a matter of screwing or wiring it into place. Once the new fixture is securely in place, you can turn on the power and enjoy your newly brightened RV.

Frequently Asked Question

Are Camper Lights 12 V?

If you are unsure if your camper’s lights are 12 volts or not, you can test them by using a multimeter. Set the multimeter to DC volts and touch the probes to the two terminals on the light fixture. If the meter reads 12 volts or more, the light is likely 12 volts.

Are LED lights better for an RV?

This is a great question, and the answer depends on your personal preference. LED lights are more efficient than incandescent lights and last longer, but some people find them too harsh. Talk to your fellow RVers to see what they recommend.

How Much Power Do Rv Led Lights Use?

If you’re considering switching to LED lighting in your RV, you might be wondering how much power they’ll use. The answer depends on a few factors, including the number of lights and the wattage of each light.

LED Tighting in RV

On average, an RV LED light uses about 0.5 watts of power. This means that 10 LED lights will use about 5 watts of power. Compare this to incandescent bulbs, which use about 40 watts of power for the same number of lights.


Replacing an RV light fixture is a relatively easy process that can be completed quickly. By following the steps outlined in this article, you should be able to easily remove and replace your old light fixture with a new one. Have any questions about the replacement process? Let us know in the comments below! Thanks for reading our post about how to replace rv light fixture

Photo of author

Dave Parker

Hi there, my name is Dave. I am 32 years old guy and had a fascination with lighting ever since I knew about LED lighting and strip lights. I have completed my bachelor's degree in electrical engineering and can understand the often complex topics in the field of LED technology. Lightow is where I share my findings, opinions, and recommendations. I hope this tips will enlighten you to the wonderful world of lighting!

Leave a Comment