Most people would agree that one of the best features is high ceilings. However, sometimes these spaces can be a little too bright and airy. Changing a light fixture is a simple DIY project that can be completed in under an hour. This post will show you how to change tall ceiling light. All you need is a screwdriver and a ladder! So, if you’re looking for ways to make your tall ceiling feel more cozy and intimate, consider changing your light fixture. Then, follow these simple steps to get the job done.
Summary: If you have a tall ceiling and wish to change the light fixture, there are a few things you will need to do. 1. Measure the height of the light fixture and purchase a light fitting that is a proportional fit. 2. Remove the existing light fitting by unscrewing the screws and removing it. 3. Install the new light fitting by screwing it into the wall in the same location as the old fitting. 4. Replace the light bulb with a brighter one and turn on the light.
Considerations on Changing Light Bulbs in Tall Ceilings
Once you have the ladder, you can remove the old light bulb. Be very careful when doing this, as the glass could shatter if you are not careful. Once the old light bulb is out, put the new one in and replace the cover. Make sure that the cover is tightly screwed on to not come off in the future. Finally, test to ensure that the light works before you exit your tall ceiling.
What Size & Type of Replacement Bulb?
When changing a tall ceiling light, you must take the size and type of replacement bulb into account. Most tall ceiling lights use a candelabra base bulb, so it is essential to find one of the same size and shape. The most common replacement bulb size is 60 watts, so it is advisable to find a bulb with that wattage.
How to Change Tall Ceiling Light Step by Step
Step 1: Check the Power is OFF
Before you change a tall ceiling light bulb, it is important to ensure that the power going to the fixture is off. This will prevent any accidents and avoid injury from touching a live wire. To ensure this, look at the switch on the wall and see if it is turned off.
If you are unsure of the switch’s position, it might be best to simply visit your local home improvement store and purchase a new bulb.
Step 2: Check that the Old Bulb is Cooled Down
After you have turned the switch off, it is important to make sure that the old bulb has cooled down. After several minutes of having the power off, you can tell if a light bulb is cooled by simply touching it with your bare hand. If it feels very hot, leave it alone and purchase a new one. If it seems relatively calm, then you are safe to change the light bulb.
Before removing the old bulb, make sure to wear safety goggles and use a ladder.
Step 3: Remove the Old Bulb
The first thing you need to do is make sure the power is off and the old bulb has cooled down. Then you can remove the old bulb by holding onto the metal base and gently pulling it out. Be sure to hold onto the metal base until you have placed it on a nearby table or step ladder.
Step 4: Bulb Grabber Assistance
If you are having trouble removing the old bulb, then it might be helpful to have an assistant use a long-handled grabber tool to hold the bulb while you unscrew it. This may also prevent injury if the glass part of the light bulb’s metal base breaks unexpectedly. If using a grabber tool is too difficult for you, then it might be best to purchase a new bulb instead.
Step 5: Tall Ladder for High Ceiling Light Bulb Replacement
In order to replace a tall ceiling light bulb safely, you will need a tall ladder. A standard kitchen or step ladder can be used, but it is quite difficult for some people to reach the necessary height. When possible, use a tall ladder to make the process easier and safer.
Step 6: Remove Protective Glass Covering
When you purchase a light bulb from your local home improvement store, it will usually come in protective packaging that must be removed prior to installation. Be sure to remove this coating carefully in order to prevent injury and also to prevent it from falling into the fixture. Keep reading to know more about how to change tall ceiling light.
Step 7: Unscrew Bulb Base from New Bulb
To change a light bulb, first remove the old one by unscrewing it. Then, remove the protective glass covering from the new light bulb. Next, unscrew the metal base for the light bulb. Finally, screw in the new light bulb.
Step 8: Ladder Hooks & Pole Hooks for Changing Ceiling Light Bulbs
It’s time to screw in your new light bulb, but first, make sure your ladder or step stool can hold your weight. If possible, use ladder hooks to keep the ladder from slipping while you’re changing the light bulb.
If this is not possible, then use a pole hook instead to keep your ladder steady while you screw in the metal base of the new light bulb into place. After doing so, proceed to Step 9.
Step 9: Screw in New Bulb
Place the new light bulb into position on top of the metal base, then gently turn it counter-clockwise until you feel it catch. Continue twisting the light bulb until it is hand-tight, then use a common adjustable wrench to tighten it further. If possible, use an extra set of hands for this part of the process to ensure that the light bulb does not fall from your hands.
Step 10: Step Platforms & Scaffold Boards for Changing Tall Ceiling Light Bulbs
Once you have tightened the new light bulb into place, carefully step down from your tall ladder or step stool. Then, balance yourself with one hand on the ladder while you turn the metal base of the light bulb with your other hand until it is securely in place. After making certain that all connections are secure, you can turn on your new light bulb and check it out to ensure that the light works properly.
Step 11: Remove Ladder or Step Stool from Area
If all of your tall light bulbs have been changed, then it is time to move your ladder or step stool away from where you were changing them. Once again, be certain that your ladder is in a stable place where it will not tip or slide when you try to take it away from the area.
Frequently Asked Question
What Is the Difference Between Fluorescent and Led Lighting?
LED lighting is a type of light bulb that uses light-emitting diodes (LEDs) to produce light. Fluorescent lighting is a type of light bulb that uses a gas-discharge tube to produce light.
What Is Led Lighting, and Why Should I Use It?
LED lighting is a light bulb that uses light-emitting diodes (LEDs) to produce light. LED lamps are much more efficient than traditional incandescent light bulbs and last longer.
There are several reasons why you should consider using LED lighting in your home:
- LED lamps are much more efficient than traditional incandescent light bulbs and last much longer.
- LED lamps produce very little heat, making them a safer option for your home.
- LED lamps to come in a variety of colors and styles so that you can find the perfect lamp for your needs.
What Are the Advantages of Installing Led Lighting?
There are several advantages to installing LED lighting in your home:
- LED lamps are much more efficient than traditional incandescent light bulbs and last much longer.
- LED lamps produce very little heat, making them a safer option for your home.
- LED lamps to come in a variety of colors and styles so that you can find the perfect lamp for your needs.
You Can Check It Out to: Hang a Clamp Light
Conclusion
Ready to take your home from bland. You can make the space feel more like yours with a few tweaks. It’s time for a change! Updating your light fixtures is an easy way to add personality to any room in just minutes. The best part of this project is that it doesn’t have to cost you much at all – especially if you’re working with older light fixtures or lamps around the house. All you need are a few tools and supplies, so see what we’ve done below!
We hope this inspires you to start making changes in your own living spaces today! Thanks for Checking our blog post on how to change tall ceiling lights.
