How to Clean Led Grow Lights

If you’re an indoor cannabis grower, then you know the importance of having a good LED grow light. Not only do they help your plants flourish, but they also save you money on your electricity bill. However, like any other electronic device, LED grow lights need to be cleaned every once in a while to ensure optimal performance. This blog post will show you how to clean led grow lights using just a few simple steps. So keep reading for more information.

Summary: To clean your led grow lights, first turn off the power to the unit and wait 10 minutes for the heat to dissipate. Next, remove the grow light cover by unscrewing the two screws on the side. Once the cover is off, take a soft cloth and wipe down the entire light. Make sure to get all of the dirt, dust, and debris off of the light. Once the light is clean, replace the cover and screw it back in place.

How to Clean Led Grow Lights

What Causes LED Grow Lights to Get Dirty?

LED grow lights can get dirty for several reasons, including:

Dust:

LED grow lights can start to dim over time if dust builds up on them, whether it’s from your grow room or the outside air. Dust can also block the cooling vents on your light, leading to overheating and damage.

Resin:

If you’re using cannabis grow light, then the resin will build up on it over time. This can happen even if you’re using a resin-resistant grow light. If left unchecked, the resin can cause your light to dim and eventually stop working altogether.

Water:

Water can condense on your grow light and cause it to rust or corrode over time. This is especially true if you live in a humid climate. So it’s important to keep your grow light dry to prevent this.

Moisture:

Moisture can also condense on your grow light and cause it to rust or corrode over time. Therefore, keeping your light in a well-ventilated area is important so that moisture does not have a chance to build up.

Keeping Light in a Well Ventilated Area

Things You’ll Need

To clean your LED grow light, you’ll need the following supplies:

  • A soft cloth
  • A vacuum with a soft brush attachment
  • Isopropyl alcohol (optional)

Step by Step How to Clean Led Grow Lights:

1. Unplug Your Grow Light

The first step to cleaning your grow light is to unplug it from the power source. This will prevent any accidents from happening while you’re cleaning it. To do this, simply find the power cord and unplug it from the outlet. If your grow light is hardwired, you’ll need to turn off the breaker that supplies power.

2. Remove the Led Grow Light

In order to remove a led grow light, you must first unscrew it from its mounting. If the grow light is hardwired, you must also disconnect it from the power source.

3. Dust Your Led Grow Light

Once the grow light is removed, it’s time to dust it off. You can use a soft cloth or a brush attachment on a vacuum cleaner to do this. Avoid using anything abrasive, as this could damage the light. Start by dusting off the outside of the light, paying special attention to any crevices or areas where dust might have accumulated. Once you’ve dusted the outside, move on to the inside of the light. Again, use a soft cloth or brush attachment to avoid damaging the light. Once you’ve dusted the inside and outside of the light, it’s time to move on to the next step.

Dusting Off the Outside of the Light

4. Clean the Led Grow Light’s Lens

The next step is to clean the grow light’s lens. This is important because the lens is what focuses the light onto the plants. If the lens is dirty, the light will be diffused, and the plants will not get as much light as they need.

You will need a soft cloth and a mild cleaning solution to clean the lens. You can either use water or a gentle soap. Do not use any harsh chemicals or abrasive materials, as these can damage the lens. Gently wipe the lens with the cloth until it is clean. Be sure to get into all the nooks and crannies. If you are using soap, be sure to rinse the lens well with water to remove all the soap residue.

5. Vacuum Your Led Grow Light

The next step is to vacuum your grow light. This is important because it will remove any dust or debris you might have missed while cleaning it by hand. Vacating your grow light every few months is also a good idea to keep it in top condition. To vacuum your grow light, first, make sure that it is unplugged, and then use a soft brush attachment to vacuum the light. Be careful not to scratch the surface of the light.

6. Clean the Led Grow Light’s Reflector

The next step is to clean the grow light’s reflector. The reflector is what helps to focus the light onto the plants, so it’s important to keep it clean. To clean the reflector, use a soft cloth and some rubbing alcohol. Rub the reflector gently with the cloth until it’s clean. If the reflector is particularly dirty, you may need to use a soft brush to remove all the dirt and grime. Be careful not to scratch the reflector.

Rub the Reflector Gently With the Cloth

7. Clean the Ventilation Ports

To keep your grow light in good condition, it’s important to clean the ventilation ports regularly. This will help ensure that the light doesn’t overheat and sustain damage. You can clean the ports using a soft brush or a can of compressed air. Just be sure to remove any debris that’s blocking the ports.

If you are using a can of compressed air, hold it upside down so that the air will blow the debris out of the ports.

8. Remove Any Resin Buildup

To keep your grow light in good condition, it’s important to clean the ventilation ports regularly. This will help ensure that the light doesn’t overheat and sustain damage. You can clean the ports using a soft brush or a can of compressed air. Just be sure to remove any debris that’s blocking the ports.

9. Wipe Down the Led Grow Light

After you have turned off and unplugged your grow light, the next step is to wipe it down. This is important because it will remove any fingerprints or smudges that might be on the light. Use a clean, lint-free cloth to wipe down the light. If there are any stubborn spots, you can use a mild soap and water solution to remove them.

10. Rinse the Led Grow Light

Another step is to rinse your Led Grow Light with clean water. Make sure to remove any excess water and allow the light to air dry completely before using it again. If you have a water-resistant grow light, you can skip this step.

11. Dry Your Led Grow Light

It’s important to dry your grow light after you clean it. Use a clean, lint-free cloth to wipe down the outside of the unit, being careful not to touch the light bulbs. If any water remains on the grow light, it could cause corrosion. Allow the unit to air dry completely before using it again.

Allow the Unit to Air Dry Completely

12. Inspect Your Led Grow Light

After you have cleaned and dried your grow light, it’s a good idea to inspect it for any damage. Look for any cracks, frayed wires, or other signs of wear and tear. If you find any damage, be sure to repair it before using your grow light again. If you’re using a grow light for the first time, it’s a good idea to test it out before using it on your plants. Set up your grow light in a well-ventilated area and turn it on. Let it run for a few hours to make sure it’s working properly.

Tips and Warnings on How to Clean Led Grow Lights:

Tips:

  1. Unplug or turn off the power to your LED grow light before cleaning it.
  2. Use a clean, soft cloth to wipe down the light.
  3. Be careful not to get water on the LED bulbs or inside the fixture.
  4. Use a mild soap and water solution if needed.
  5. Dry the light completely before turning it back on.

Warnings:

  1. Avoid using a pressure washer or other high-powered water cleaners on your LED grow light, as this can damage the light.
  2. Do not use harsh chemicals or abrasive materials to clean your LED grow light, as this can also damage the light.
  3. Be careful not to get water on the LED bulbs or inside the fixture, as this can cause problems with the light.
  4. Make sure the power is off before cleaning your LED grow light.

Frequently Asked Questions

What Do You Clean Led Lights With?

If you’re looking to keep your LED lights shining brightly, then you’ll need to clean them regularly. Depending on the type of LED light that you have, different cleaning methods may be required. Some common cleaners include vinegar and water, contact solutions such as methylene chloride or sulfuric acid, or a commercial cleaner like Beam Bright.

Make sure to test the cleaner on an inconspicuous part of the light first before using it on your entire fixture. Once cleaned, replace any filters if necessary in order for LEDs to emit their best color spectrum.

How Do You Maintain Led Lights?

One of the best ways to keep LED lights operated and shining brightly is to regularly clean them. This can be done by using a mild solution of soap and water, or in some cases, an all-purpose cleaning product. Make sure to wipe down the light fixture thoroughly so that any dirt or dust particles are removed. You should also use a clear lens protector on top of each light if you plan on keeping them lit outside during daylight hours.

If your LEDs tend to suffer from fading or discoloration over time, it may be necessary to replace them completely. To do this, remove the old lighting fixtures and install new ones that are made specifically for LED lighting.

Can You Clean Led Light Bulbs?

Yes, you can! However, it is important to note that LED light bulbs are not like traditional light bulbs – they have a special coating that needs to be cleaned regularly in order to keep them operating at their best. Here are a few tips for cleaning LED light bulbs:

1. Use a Mild Detergent

Certain detergents are specifically designed to clean LED light bulbs, and they will not damage the bulb or harm the environment.

2. Use Warm Water and a Soft Cloth

Wet the cloth with warm water and wring it out well. Rub the cloth against the inside of the bulb until it is clean.

3. Dry the Bulb Off

Make sure to dry the bulb off completely before storing it. This will help prevent moisture from building up inside the bulb and causing issues down the road.

Do Led Lights Need Changing?

this will vary depending on the type of light fixture and how often it is used. However, if you are looking for an easy way to improve your home’s lighting without any major upgrades, then changing your LED lights may be a good option. There are many options available when it comes to replacing old bulbs with new LEDs, so there is sure to be a bulb that fits your needs. Just make sure that you choose a light source that meets the standard requirements for indoor lighting in your geographic area.

Conclusion

This article provides detailed instructions on How to Clean Led Grow Lights. It is important to clean your grow lights regularly to ensure optimal plant growth and prevent the spread of disease. Regular cleaning will also prolong the life of your grow lights. By following these simple steps and using the right products, you can keep your lights shining brightly for months or even years to come. Have any questions? Leave us a comment below.

Photo of author

Dave Parker

Hi there, my name is Dave. I am 32 years old guy and had a fascination with lighting ever since I knew about LED lighting and strip lights. I have completed my bachelor's degree in electrical engineering and can understand the often complex topics in the field of LED technology. Lightow is where I share my findings, opinions, and recommendations. I hope this tips will enlighten you to the wonderful world of lighting!

Leave a Comment