If you’re like most homeowners, you probably have at least one exterior light mounted on your house’s side. While these lights are great for providing illumination when it’s dark outside, they can also be a bit of an eyesore if they’re not neatly tucked away.
Luckily, there’s a simple solution to this problem: opening up the light cover to expose the light bulb. This easy modification will make your light fixture much less noticeable from the street, and it only takes a few minutes to complete. Keep reading to learn how to open half lantern outside light in just a few easy steps!
What is Half Lantern Outside Light?
A Half Lantern Outside Light is a type of exterior light fixture typically mounted on the side of a house. This type of light is excellent for providing illumination when it’s dark outside, and it can also be a bit of an eyesore if it’s not neatly tucked away. Luckily, there’s a simple solution to this problem: opening up the light cover to expose the light bulb. This easy modification will make your light fixture much less noticeable from the street, and it only takes a few minutes to complete. Keep reading to learn more about Half Lantern Outside Lights!
- Ladder (optional)
If you want to open up your Half Lantern Outside Light, you’ll need a few basic tools.
How to Open Half Lantern Outside Light Step by Step Guide
Step 1: Determine
To secure your Half Lantern Outside Light, first determine how it is attached. Most lights of this type are held in place by a small screw on the inside of the fixture. Do not remove this screw. If this is the type of light assembly you have, then open the cover on the front of your light. You should be able to twist or slide the cover off, exposing the light fixture inside.
If your Half Lantern Outside Light is mounted differently than most, you’ll need to find out how it is attached to the house. In most cases, there is a decorative plate on the outside of the light that covers the fixture. You’ll need to remove this plate before getting started, which may be held in place with screws.
Step 2: Open Half Lantern Outside Light
To take your Half Lantern Outside Light apart, you need to open up the cover on the front of the light. If the light is held in place by a small screw, you can twist or slide the cover off. If the light is held in place by other methods, you should follow the instructions that came with your fixture. Most exterior light fixtures are mounted with screws on the inside of the fixture, so if yours uses this system, just unscrew them to take your Half Lantern Outside Light apart.
Step 3: Remove Housing
Once you’ve taken your light apart and accessed the bulb inside, all you have to do is remove the existing bulb and replace it with a new one of your choosing. For best results, purchase an LED replacement bulb, as they use considerably less power than traditional incandescent bulbs and last much longer. If you want to know more about how to open half lantern outside light, keep reading.
Step 4: Remove Light Bulb
As an additional safety precaution, make sure to wear gloves while handling any potentially live wires or exposed bulbs.
Step 5: Replace Light Bulb
Step 6: Reassemble and Test
It’s a good idea to test your Half Lantern Outside Light before reattaching it, to make sure everything is working properly. After testing, reassemble the light and secure it in place. Your exterior lighting will be significantly improved.
Step 7: Enjoy Your New Light
Now that you’ve fixed your Half Lantern Outside Light, enjoy the improved exterior lighting that you now have! Your new LED replacement will provide bright, floodlight quality lighting outside of your home. Make sure to keep an eye on your Half Lantern Outside Light so that it doesn’t come apart again, and enjoy your upgraded exterior lighting!
Keep reading for more information about how to open half lantern outside light.
Frequently Asked Question
- First, you will need a screwdriver that fits the screws on the fixture.
- Once you find one, unscrew all of the screws from where they are attached to the exterior wall.
- After unscrewing them, make sure to take them off the fixture and put them aside. In order for this process to go smoothly, use a towel or rag underneath as instructed. This way, if any small pieces fall apart, it won’t damage your flooring/wallpaper/etc…
- After removing each of those eight flathead screws, turn over the lamp and look for a wire that connects into an opening at either end or top, then grab hold of both wires with one hand, so the lamp doesn’t pull back into the wall.
- With one hand holding onto the two wires, grab your screwdriver and start to slowly open the fixture by pulling the bottom of it out away from you.
- Once pulled out enough to separate the exterior body from the interior light bulb housing, continue to hold each wire with one hand while unscrewing the remaining screws to take off the exterior body of the lamp.
- After removing all eight screws, you should be left with two wires and an empty exterior light bulb housing.
Additional Warning: If you are feeling at all unsure about how to do this or if it is too complicated, please contact a professional. This is not a job for the average person and could result in electrocution or other serious injuries.
How Do You Open a Half Lantern Outside Light?
There is a latch on the top and bottom of the light. The top latch can be opened by pushing down on it, and the bottom latch can be opened by pulling it up. Hold the light with your other hand and lift up on it to open half lantern outside light.
When you fix the bulb, fix the plastic loop over the wire. Once installed, this will act as a handle when you hold onto it to pull out or push in the lamp. Hold onto the loop and pull it through into the house (to remove) or out into the garden (to install).
Push the bulb holder through the hole until it is flush with the outside of your house. Then, push down on the plastic loop to lock it into place. The light should now be securely fixed to your final; you can open half lantern outside light for next use by pressing a wooden plunger on top of the fixture, which you will find is designed for this purpose.
How Do I Remove My Outdoor Light Cover?
There are two ways to remove the cover of your outdoor light- either by using the top latch or by pushing down on the wooden plunger.
Using the top latch, push down on the latch and then pull up on the light to remove it.
Using the wooden plunger, push down on the plunger and then pull up on the light to remove it.
The plunger opens the top and bottom latches at once, creating a convenient way to remove your light. How to open half lantern outside light is achieved easily using this method.
Frequently Asked Questions
Can You Replace Recessed Light Fixture?
Depends on the type and size of your recessed light fixture. If it is a standard incandescent light bulb, you may be able to replace it with a CFL or LED bulb. For fluorescent fixtures, you will likely need to replace the entire fixture.
Can You Replace Outdoor Led Bulbs?
If you are looking for a more environmentally friendly option, there are many LED bulbs that are designed to be used outdoors. For example, the Philips LED A19 is a highly popular bulb that is designed to be used outdoors.
As you can see, it’s not too difficult to open a half lantern outside the light. With just a few simple tools and a little bit of know-how, you can have your light shining brightly in no time at all. If you have any questions or run into any problems while trying this project yourself, be sure to reach out to us for help.
We’re always happy to assist our customers in achieving their home improvement goals. Have you opened your half lantern outside light yet? If so, we want to hear about your experience in the comments section below. Thanks for reading our post about how to open half lantern outside light.