How to Fix Onstar Red Light

Onstar is a service offered in most General Motors vehicles. It provides hands-free communication, directions, and emergency services. One common issue with OnStar is the Red Light. This article will provide instructions on how to fix onstar red light. With a few simple steps, you can have your OnStar back up and running like new. Keep reading to learn more.

Summary: If your Onstar red light is flashing on and off, you may need to reset your unit. To do this, turn off your car, remove the battery, wait five minutes, reinsert the battery, and turn on your car. If the problem persists, you may need to take your car in for service.

How to Fix Onstar Red Light

What Causes the Onstar to Red Light?

There are a few different reasons why the OnStar red light may come on in your vehicle. One of the most common reasons is a loss of connection with the OnStar module. This can be caused by several things, such as a loose connection, bad wiring, or a problem with the OnStar module itself. Another common reason for the red light to come on is a dead battery.

If the battery in your OnStar module is dead, it will need to be replaced. Additionally, if the doors in your vehicle are opened while the engine is off, this will also cause the OnStar red light to come on. The other main reason the red light may come on is due to a subscription issue. If your OnStar subscription lapsed, the red light would indicate that the service is no longer active. The red light will also come on if you cancel your OnStar service.

Some Effective Ways How to Fix Onstar Red Light

1. Check the Connections

The first thing you should do if the OnStar red light is on is to check all the connections. This includes the connection between the OnStar module and the vehicle and the connection between the OnStar module and the antenna. Make sure that all connections are tight and secure. If you find any loose or damaged wires, you will need to replace them. Try to wiggle the OnStar module to see if the red light goes off. If it does, then you know that the module is not properly secured

2. Inspect the Wiring

If the connections are all secure, the next step is to inspect the wiring. Look for any obvious signs of damage, such as frayed or broken wires. Also, check for any loose connections. You may need to use a multimeter to test the continuity of the wiring. First, disconnect the negative battery terminal. Next, use the multimeter to test the wire between pins 1 and 2 of the OnStar connector.

Check for Any Loose Connections

The meter should show continuity. If it does not, then the wire is damaged and will need to be replaced. Try the same test with the other wires in the OnStar connector.

3. Replace the Battery

If the wiring is in good condition, the next step is replacing the battery in the OnStar module. You can purchase a replacement battery from your local GM dealership or an online retailer. Once you have the new battery, first disconnect the negative battery terminal. Next, remove the OnStar module from its mounting location. Remove the old battery and install the new one.

Be sure to insert the new battery with the correct polarity. Once the new battery is installed, replace the OnStar module and reconnect the negative battery terminal. Try to activate OnStar. If the red light is still on, move on to the next step.

4. Open and Close the Doors

If the OnStar red light is still on, try opening and closing your vehicle’s doors. This will reset the OnStar system and may fix the problem. To do this, first, make sure that the vehicle is in Park. Next, open and close all of the doors. Once the doors are closed, wait for the OnStar system to reset. This may take a few minutes. Try to activate OnStar. If the red light is still on, move on to the next step.

5. Check the Subscription Status

If your OnStar subscription has lapsed, the red light will indicate that the service is no longer active. To check the status of your subscription, first, sign in to your OnStar account. Next, click on the “My Subscription” tab. Here you will be able to see the status of your subscription and when it is set to expire. If your subscription has lapsed, you will need to renew it in order to reactivate OnStar.

6. Cancel OnStar Service

If you no longer want to use the OnStar service, you can cancel your subscription by calling customer service. Once you cancel your subscription, the red light will come on to indicate that the service is no longer active. If you decide later that you want to reactivate OnStar, you will need to sign up for a new subscription.

You Can Cancel Your Subscription

7. Reset the OnStar Module

If the OnStar red light is still on after trying all of the above steps, you may need to reset the OnStar module. First, disconnect the negative battery terminal. Next, remove the OnStar module from its mounting location. Use a paperclip or other small object to press and hold the reset button for 10 seconds. Once the module has been reset, replace it and reconnect the negative battery terminal.

Try to activate OnStar. If the red light is still on, you may need to take your vehicle to a GM dealership or an OnStar service center for further diagnosis.

8. Contact OnStar Customer Service

If you have tried all of the above steps and the OnStar red light is still on, you should contact OnStar customer service for further assistance. Try to activate OnStar. The system will automatically connect you to a customer service representative. Explain the problem, and they will help you troubleshoot the issue. If the problem cannot be resolved over the phone, they may need to send a technician to your location.

9. Bring the Vehicle to a Dealer

If you are still having trouble with the OnStar system, you may need to take your vehicle to a GM dealership or an OnStar service center. The technicians there will be able to diagnose and fix the problem. Be sure to bring your OnStar account information with you so they can check your subscription status.

Tips and Warnings on How to Fix Onstar Red Light

Tips:

  1. Check the Onstar fuse if your system is not working.
  2. If the fuse is good, then reset the Onstar by disconnecting the battery for 30 seconds and reconnecting it.
  3. If you still have a problem, then take your car to the dealer for service.
  4. You can also try contacting Onstar customer service for assistance.
  5. If the red light is flashing, it could indicate a low battery or loose connection.
  6. Try resetting the system by disconnecting the battery for 30 seconds and reconnecting it.
Check the Onstar Fuse

Warnings:

  1. Do not attempt to fix the Onstar system yourself if you are not familiar with electrical systems.
  2. Always consult with a professional if you are unsure about any repair.
  3. Be sure to have your car’s VIN handy when you call Onstar customer service for assistance.
  4. Do not disconnect the battery while the car is running. This could cause damage to the electrical system.
  5. Do not attempt to reset the Onstar system if the red light is flashing. This could indicate a more serious problem that requires professional assistance.

Why is My Onstar Button Not Working?

There are a few reasons why your Onstar button may not be working. The first reason could be that you have an unpaid subscription. If you have an unpaid subscription, your Onstar services will be suspended, and you will not be able to use the Onstar button. The second reason could be that your vehicle is not compatible with Onstar. You can visit the Onstar website or contact customer service to find out if your vehicle is compatible.

The third reason could be that your vehicle has a problem with the Onstar system. If this is the case, you will need to take your vehicle to a nearby Onstar dealership or service center to have the problem diagnosed and repaired.

Is Onstar Free?

Onstar is not free. There is a monthly subscription fee for the service. However, there are often promotions and discounts available that can make the service more affordable. You can also add Onstar to your car insurance policy for an additional fee. Normally the fee is around $5-$8 per month.

What Does the Onstar Red Light Mean?

The Onstar red light indicates a problem with the Onstar system. If the red light is flashing, it could indicate a low battery or loose connection. Another possibility is that the Onstar system has been deactivated. If the red light is solid, it means that the Onstar system is working properly.

It Could Indicate a Low Battery

Conclusion

So there you have it! These are some tips on how to fix onstar red light. Follow these steps, and you should be able to resolve the issue quickly and easily. However, if you are still having trouble, be sure to bring your car to a GM dealership or an Onstar service center for assistance. Thanks for reading!

Photo of author

Dave Parker

Hi there, my name is Dave. I am 32 years old guy and had a fascination with lighting ever since I knew about LED lighting and strip lights. I have completed my bachelor's degree in electrical engineering and can understand the often complex topics in the field of LED technology. Lightow is where I share my findings, opinions, and recommendations. I hope this tips will enlighten you to the wonderful world of lighting!

Leave a Comment