How to Change the Bulb in a Salt Lamp

A salt lamp is a large piece of Himalayan pink salt with a small light inside. The light illuminates the salt, giving it a beautiful pink or orange glow. People use salt lamps as decoration, therapy, and even Night Lights. Salt lamps have many health benefits, including reducing anxiety, improving sleep, and relieving symptoms of allergies and asthma. There is some scientific evidence to support these claims, but more research is needed.

Summary: The instructions for changing a salt lamp bulb are simple. First, remove the old bulb by unscrewing the base. Next, take the new bulb and screw it into the base until it is secure. Finally, replace the cover.

How to Change the Bulb in a Salt Lamp

If you have a salt lamp, you know that the light bulb inside it eventually burns out. But, if you’re not sure how to change the bulb, don’t worry – this post will show you how to change the bulb in a salt lamp. Changing the bulb in a salt lamp is a simple process, and it only takes a few minutes. So, if your salt lamp is without light, follow these steps to get it up and running again.

Do Salt Lamps Need a Special Bulb?

Yes, salt lamps need a special bulb. The bulbs used in salt lamps are called heat lamps, and they emit infrared light. This type of light is not visible to the human eye, but it can be felt as heat. Heat lamps are used in salt lamps because they help to evaporate the water inside the salt rock. This evaporation process is what makes the salt lamp produce negative ions. So, if you want your salt lamp to work properly, you need to use a heat lamp bulb. These bulbs can be found at most hardware stores. They are also available online.

What Wattage Bulb Do I Need for My Salt Lamp?

The size of your salt lamp will determine how bright it will be. Smaller lamps can use a 15-watt bulb, while larger lamps may require a 25-watt or even a 40-watt bulb. If you’re not sure what size bulb you need, check the manufacturer’s instructions or ask a salt lamp retailer.

Once you have the right wattage bulb, changing it is a simple matter of screwing in the new one. Just make sure to handle the bulb with care, as it can break easily. If your salt lamp is starting to look dull, it might be time for a new bulb. Follow these steps, and you’ll have your lamp shining brightly in no time.

Lamp Shining Brightly

Step by Step How to Change the Bulb in a Salt Lamp:

1. Start by Unplugging the Lamp From the Power Source.

To change the bulb in a salt lamp, first unplug it from the power source. This is important for two reasons. First, you don’t want to be electrocuted while changing the bulb. Second, salt lamps are made of salt, which is a conductor of electricity. If the lamp is plugged in while you’re changing the bulb, you could short-circuit the lamp and cause a fire.

2. Remove the Salt Globe From the Base of the Lamp.

Once the lamp is unplugged, you can remove the salt globe from the base. The globe is usually held in place by a metal clamp. To remove the salt globe from the base of the lamp, simply unscrew the metal screws that are holding it in place. Once you have removed the screws, lift the globe straight up and out of the base. Be careful not to touch the light bulb or any of the electrical components inside the base, as this could cause a shock.

3. Unscrew the Metal Cap That Holds the Light Bulb in Place.

If you want to change the light bulb in your salt globe, first you have to remove the metal cap that’s holding it in place. To do that, just turn the cap to the left. You might need to use a little bit of force to get it started, but it should come off easily once it’s loosened. If the metal cap is stuck, you can try using a pair of pliers to help you get it off.

Try Using a Pair of Pliers

4. Remove the Old Light Bulb and Replace It With a New One.

To change the light bulb in a salt lamp, unscrew the old light bulb and screw in a new one. Be sure to use the same wattage bulb so as not to damage the lamp. You can find replacement bulbs at most hardware stores or online. If your lamp has a dimmer switch, make sure also to buy a new light bulb that is compatible with it.

5. Screw the Metal Cap Back on to Secure the New Bulb in Place.

Once the new bulb is in place, screw the metal cap back on to secure it. Make sure that the cap is screwed on tightly so that the bulb doesn’t come loose and fall out. Then, you can screw the salt lamp back into its base and turn it on. And that’s it! You’ve successfully changed the bulb in your salt lamp.

6. Place the Salt Globe Back on the Base of the Lamp.

Now that the new bulb is in place, you can screw the salt globe back onto the base of the lamp. Make sure that the globe is screwed on tightly so that it doesn’t come loose and fall. If your lamp has a metal base, you can now screw the cord into the base and plug it into an outlet. Now that you know how to change the bulb in your salt lamp, you can keep it working for years to come. With proper care and maintenance, you should be able to get years of use out of your salt lamp.

Plug into an Outlet

7. Plug the Lamp Back into Its Power Source.

Now that you have a new bulb in place, it is time to plug the lamp back into its power source to enjoy the benefits of your salt lamp once again. First, make sure that the new bulb is screwed in tight. Then, find the power cord for your lamp and plug it into an outlet.

8. Turn on the Power Switch and Enjoy Your Newly Lit Salt Lamp.

Now that you know how to change the bulb in your salt lamp, it’s time to turn on the power switch and enjoy the newly lit salt lamp. New light bulbs can provide a different atmosphere in your home, so be sure to take advantage of the new light bulb’s mood-boosting benefits.

You Can Check It Out to Make a Carb in a Light Bulb

Tips and Warnings on How to Change the Bulb in a Salt Lamp


  • Always handle a salt lamp with care, as they are fragile.
  • Make sure to unplug the lamp before changing the bulb.
  • Choose the correct size bulb for your lamp.
  • Use gloves when changing the bulb to avoid coming into direct contact with the salt.
Choose the Correct Size Bulb


  • Do not touch the salt with bare hands, as it can cause skin irritation.
  • Do not look directly at the bulb when changing it, as this can cause eye irritation.
  • Be careful not to drop the salt lamp, as it can break easily.
  • Do not use a higher wattage bulb than recommended, as this can cause the salt to overheat and melt.
  • Plug the lamp in only after the bulb has been changed.

What Causes the Bulb in a Salt Lamp Not Working?

There are a few different reasons why the bulb in your salt lamp may not be working. The most common reason is simply that the bulb has burned out and needs to be replaced. Other reasons could be that the power cord is not plugged in correctly, the switch is turned off, or there is a problem with the socket. If you have checked all of these things and the bulb still does not work, then it may be time to buy a new salt lamp.

Buy a New Salt Lamp

How long does the bulb in a salt lamp last?

The lifespan of a salt lamp bulb can vary depending on the type of bulb that is used. However, most salt lamp bulbs will last for around 2,000 hours. If you use your salt lamp for an average of 3 hours per day, then the bulb will need to be changed every 667 days, or roughly every two years. If you notice that your salt lamp is not emitting as much light as it used to, then it is probably time to change the bulb. Changing the bulb in a salt lamp is a relatively easy process that only requires a few steps.

Why Does Salt Lamp Bulb Keep Blowing?

It’s not uncommon for salt lamp bulbs to keep blowing. This is usually due to one of two reasons: either the bulb is too hot, or the socket is too tight.

Too Hot Bulb:

If the bulb is too hot, it will eventually burn out. To prevent this, make sure to use a salt lamp bulb with a lower wattage. We recommend using a 25-watt bulb.

Socket Too Tight:

If the socket is too tight, it can cause the bulb to overheat and eventually burn out. To fix this, loosen the socket slightly.

Frequently Asked Questions

Do Salt Lamps Require a Special Bulb?

Salt lamps require a special bulb, but there are many different types of bulbs available that you can choose from. You just need to make sure the one you select is compatible with your salt lamp. Some common choices include incandescent and fluorescent lightbulbs.

What Kind of Bulb Does My Salt Lamp Use?

Most Salt Lamps Use Regular Lightbulbs

Most salt lamps use regular lightbulbs, but there are also LED salt lamps that use less energy and last longer. The key factor to consider when selecting a salt lamp is the type of bulb it uses. There are basically three types of bulbs used in salt lamps: tungsten halogen (THC), incandescent ( Edison ), or fluorescent ( CFL ).

For THB Salt Lamps, using an ordinary 120V lightbulb will work just fine. However, if you want to buy an LED Salt Lamp, then make sure to get one that uses 6500K color temperature because this type of bulb emits a cooler white light that has been found to be more soothing than other colors. Additionally, CFLs tend not to give as much heat as THBs or LEDs and can actually be harmful for your skin if used daily for too long.

Do Salt Lamps Stop Working?

Some people believe that salt lamps stop working after a certain amount of time because the salt seeps into the light bulb and affects its performance. Others say that the salt can build up on the glass around the lightbulb, eventually blocking it from working. Either way, it’s important to check your salt lamp’s warranty if you think it may have stopped working.

Can You Put an Led Bulb in a Salt Lamp?

There are many myths and misconceptions about salt lamps, but one of the most common is that you can’t put an LED bulb in a salt lamp. The truth is that you can, as long as the wattage of the bulb isn’t too high. Most salt lamps use less than 100 watts, so a 12-watt LED should be just fine. Just make sure to read the manufacturer’s instructions before using your lamp!


This article provides information on how to change the bulb in a salt lamp. So, there you have it! Changing the light bulb in your salt lamp is a simple process that just requires a little bit of know-how. By following these easy steps, you can keep your salt lamp looking and working its best for years to come. Have you ever changed the light bulb in a salt lamp before? If not, be sure to give it a try and let us know how it goes in the comments below. We’d love to hear about your experiences.

Photo of author

Jennifer Branett

I'm Jennifer, and I love everything about lighting. I have spent the last two years learning all I can about how lighting affects your home, and now I'm an LED light enthusiast. My passion is helping people see just how beneficial proper lighting can be for their lives. When you're working with me, you're getting someone who truly cares about making your home look and feel its best.

Leave a Comment