How to Fix a Ring Light That Won’t Turn on

A ring light is a great tool to have in your photography arsenal. They provide even, diffuse light and produce flattering portraits. But what do you do when your ring light stops working? When your ring light doesn’t turn on, it can be frustrating. You may not know what to do to get it working again. This guide will show you how to fix a ring light that won’t turn on.

Summary: If your ring light won’t turn on, there may be a simple solution. Check to see if the power is turned on to the light. If it is, try replacing the light bulb. If the power is off, check to see if the light is plugged in and working. If it is, check to see if there is a switch on the light that turns it on.

How to Fix a Ring Light That Won't Turn on

We’ll also cover some common causes of this problem and give tips for preventing it from happening again. Let’s get started! The first thing you should try is changing the batteries. If that doesn’t work, check to ensure the power cord is plugged in. If it is plugged in and the light still isn’t turning on, there might be something wrong with the light itself. Read on for more information.

7 Reasons That Causes Problem on Ring Lights

1. Batteries are Dead:

The first thing you should check is the batteries. If they’re dead, replace them and see if that solves the problem. To check the battery, you need to unscrew the light from the stand. There is usually a small cap on the side that you need to unscrew. Once you’ve done that, you can remove the batteries and check to see if they need to be replaced.

2. The Power Cord is Not Plugged In:

The light will not turn on if the power cord is not plugged in. So make sure the cord is plugged into an outlet and the light is turned on. It may also happen that the cord is plugged in but not tight enough. In this case, you need to unplug and replug it to ensure it’s secure.

Power Cord Is  Not Plugged in

3. The Light is Damaged:

If the light won’t turn on, it might be damaged. This could be because it was dropped or knocked over. If the light is damaged, you’ll need to replace it.

4. The Ring Light is Not Assembled Correctly:

If you’ve just bought a ring light or are using one for the first time, ensure it’s assembled correctly. There are usually three parts to a ring light: the light itself, the power cord, and the stand. Ensure all three parts are securely fastened before turning on the light.

5. Problem in the Circuit:

If you’ve checked all the physical parts and everything seems to be in order, there might be a problem with the circuit. This can be caused by various things, like a loose wire or a blown fuse. If you think there might be a problem with the circuit, you should take the light to a qualified technician to have it checked out.

6. Loose Wires:

If the ring light is not turning on, it could be because of loose wires. This is most likely to happen if you’ve just bought the light or moved it around a lot. To check for loose wires, you need to unscrew the light from the stand and remove the batteries. Once you’ve done that, you can gently shake the light to see if there are any loose wires inside. If there are, you can try to reconnect them yourself or take the light to a professional to have it repaired.

Need to Unscrew  The Ring Light

7. The Fuse is Blown:

Another possibility is that the fuse is blown. This is usually caused by a power surge or by connecting the light to an outlet that’s not working properly. To check the fuse, first ensure the light is disconnected from any power source. Then, open up the light and locate the fuse. If it’s blown, you’ll need to replace it with a new one. Be sure to use the same type and size of fuse as the original.

8 Effective Ways on How to Fix a Ring Light That Won’t Turn on

1. Check Your Power Source:

The most common reason a ring light won’t turn on is that it’s not getting power. Make sure the light is plugged into a working outlet or power strip and the switch is turned on. If you’re using batteries, check to see if they need replacement.

2. Check the Lamp Beads:

If your ring light won’t turn on, the lamp beads may be the problem. To check the lamp beads, ensure the power switch is in the off position. Next, unscrew the diffuser and look at the lamp beads. If they are loose, tighten them. If they are burned out, replace them. If you think the lamp beads may be the problem, but you’re not sure, contact a professional for help.

Check the Ring Lamp Beads

3. Try a Different Outlet:

If your ring light still doesn’t turn on, try plugging it into a different outlet. This will help you determine if the problem is with the light or the outlet. Make sure your outlet is working by plugging in another device. If the other device doesn’t work, the outlet may be the issue.

4. Soldering the Wires:

If there are any loose or broken wires, you may be able to fix them by soldering them. This is a more permanent solution than using tape or wire nuts. To solder the wires, you’ll need a soldering iron and some solder. First, heat up the soldering iron and then touch the tip of the wire. Next, touch the solder to the wire and let it melt. Once the solder has melted, remove the iron and allow the solder to cool.

5. Check the Connections:

Ensure all the connections are secure before turning on the light. This includes the power cord, the batteries, and wires or cables. If any of the connections are loose, tighten them. If they’re still not working, try replacing the batteries or power cord. If you think the problem is with the connections, but you’re not sure, contact a professional for help. Turn on the light and make sure it’s working. If it still isn’t, go to the next step.

6. Clean the Contacts:

If your ring light still doesn’t turn on, the problem may be with the contacts. First, use a cotton swab dipped in rubbing alcohol to clean the contact points on the bulb and inside the socket. If this doesn’t work, you may need to replace the socket.

Use a Cotton Swab

7. Replace the Old Batteries:

If your ring light uses batteries, then the batteries may be simply too old and need to be replaced. To do this, first, remove the old batteries from the light. Next, go to a store and purchase new batteries that are the same size and type as the old batteries. Finally, insert the new batteries into the light and see if it will turn on.

8. Restart the Dimmer:

The dimmer may be the problem if your ring light is equipped with a dimmer. To restart the dimmer, first, make sure that the power switch is in the off position. Next, find the reset button on the dimmer and press it. This will usually cause the light to turn on. If the light doesn’t turn on, try pressing the reset button several times.

Troubleshooting Your Ring Light

  1. Check if the power cord is plugged in correctly and the switch is turned on.
  2. If your ring light uses batteries, check to see if they need to be replaced.
  3. Inspect the bulb to see if it needs to be replaced.
  4. Make sure the dimmer switch is not turned down.
  5. Check for loose wiring and tighten any connections that may be loose.
  6. If your ring light is still not working, contact the manufacturer for further assistance.

With these simple troubleshooting tips, you should be able to fix a ring light that won’t turn on in no time!

Can a Ring Light Burn Out?

Just like any other light, a ring light can burn out. The most common reason a ring light stops working is that the bulbs have reached the end of their life. If you have a ring light that uses traditional bulbs, you will need to replace the bulbs every so often.

If your ring light is LED, it should last much longer than one with traditional bulbs. However, even LED lights can burn out eventually. If your LED ring light stops working, it could be because of a faulty power supply, a problem with the switch, or a loose connection.

Frequently Asked Questions

What Do You Do When Your Ring Light Won’t Turn on?

There are a few things that you can do if your ring light won’t turn on. First, check to see if the power is turned off at the junction box or breaker. If it’s not, then try flipping the circuit breaker for that section of the house. Next, make sure there is enough battery life in your light by checking to see if it turns on when plugged into an outlet. Finally, double-check that alligator clips (or some other form of connector) are securely connected between the lamp and the camera body.

Can a Ring Light Burn Out?

A ring light can definitely burn out, but this is typically due to malfunctioning parts rather than an inherent design flaw. In most cases, a ring light will eventually need to be replaced or repaired due to wear and tear. However, if you are consistent with using it and make sure that the batteries are fresh, your ring light should last for many years.

Can a Ring Light Work without Electricity?

ring lights can be powered by electricity or not. That said, depending on the model, some ring lights may require a power source in order to function. If you’re unsure whether or not your ring light requires electricity, it’s best to consult the product’s instructions.

Are Ring Lights Rechargeable?

While Ring Lights are not necessarily rechargeable, they can still be used multiple times before they need to be replaced. Most of the time, a Ring Light will last anywhere from 1-3 months depending on how often it is used. If it starts to become low on battery power or if there is an issue with the light itself, then you should replace the light as soon as possible.

If you’re looking for a unique and stylish way to add some extra brightness to your photos or videos, then a Ring Light might just be what you’re looking for!

Final Words

Ring lights are a great tool for photography and videography, but when they stop working, it can be frustrating. This post shows you how to fix a ring light that won’t turn on. You can do a few things if your ring light isn’t turning on: check the power cord, make sure the light is properly plugged in, or replace the battery. 

If none of those solutions work, there may be something wrong with the switch or the bulb. In that case, you’ll need to take the light apart and replace either the switch or the bulb. We hope these tips help you get your ring light up and running again! If you have any questions or want to share your tips, please leave a comment below.

Photo of author

Dave Parker

Hi there, my name is Dave. I am 32 years old guy and had a fascination with lighting ever since I knew about LED lighting and strip lights. I have completed my bachelor's degree in electrical engineering and can understand the often complex topics in the field of LED technology. Lightow is where I share my findings, opinions, and recommendations. I hope this tips will enlighten you to the wonderful world of lighting!

Leave a Comment