How to Light a Wooden Wick Candle

There are a few different types that you can choose from when it comes to candles. One of those types is the wooden wick candle. This type of candle is unique because it is made out of wood instead of the traditional cotton wick.

How to Light a Wooden Wick Candle

While they may seem like they would be more difficult to light than other types of candles, they are pretty easy to get going. This post will teach you how to light a wooden wick candle. Keep reading for all the tips and tricks you need!

Wooden wick candles are made with a wooden wick instead of a cotton wick. They’re easy to make at home and give off a warm, cozy feeling perfect for winter.

You will need a few things before you start.

  • Candle
  • Flame to Light the Candle   (Matches or Lighter)
  • Lemon Juice   (Optional)

Summary: If you’re looking to light a wooden wick candle, there are a few things you need to know first. First, make sure the candle is completely dry. Second, heat the wick until it is hot, but not smoking. Third, hold the wick over the flame and wait until the tip of the wick starts to glow a light brown. Finally, lower the wick until it touches the wax below, then hold the flame to the wick and let the heat melt the wax around the wick.

How to Light a Wooden Wick Candle Step by Step Guide

Step 1 : Gather Your Supplies

To begin, gather your supplies. You will need a lighter, wooden wick candle, heatproof surface, and any decorative items or other candles that you want to use with the wooden candle.

Preparing Candle

Next, prepare your candle by removing it from its packaging and unwrapping it from the cellophane. If you have a metal tab on your candle, remove it and set it aside for use later.

When you want to light your wooden wick candle, use a lighter to pierce through the surface of the wax where the wood meets the wax. This will allow air to flow into your candle from below and create a solid, clear flame. Be careful not to get the wax on your lighter!

Step 2 : Locate Your Wick

Pierce your candle from the bottom, and locate the wick on the top. If you don’t see a metal tab beneath the wick, take caution!

Touch your lighter to the tip of your wooden wick and allow it to ignite slowly. Once your candle is lit, blow out you’re lighter and place it down on a secure surface.

Step 3 : Light Your Tinder Material

After your candle is lit and you have made a hole to thread your tinder through, it is time to light the tinder. Place your tinder (such as dryer lint or cedar shavings) into the holed area on top of the candle.

Lighting Tinder Material

Once you see that your fuel has begun to burn,  place it against a heatproof surface and allow it to burn for roughly 10 seconds.

After your tinder has been burning for approximately 10 seconds, blow it out and place the candle on a heatproof surface. The majority of the wax should be melted at this point so that you can use a metal tab or other object to dip into the pool of melted wax and then drip it onto your tinder.

After you light your candle, it will take a little while for the wax to start melting. Once it does, you should see a strong flame coming from the tinder. Once the candle has burnt down enough that it can’t be reused, snuff out your flame and let your wooden wick candle cool before handling it.

Step 4 : Lighting the Fire in a Wood Wick Candle

After your candle has cooled, you will need to relight the wick. To do this, place your tinder beneath the wick and relight it as you did before.

When you light your candle again, blow out the flame and wait for about 10 seconds. You can do this multiple times if you want to keep using your candle. Once the wick is used up, extinguish the flame and repeat the process until there is no more wax left.

Please note that you must always handle a lit wooden wick candle with caution as it does produce heat, so do not attempt any of these steps without supervision!

Step 5 :  Extinguish the Fire in a Wood Wick Candle

To extinguish your flame, simply snuff out your tinder and wait until it has cooled off. If you wish to reuse any of the wax that is left, simply place it into a new candle or melt it down and pour it into another container for future use.

Extinguishing the Flame

Once your candle is completely out, you may re-wrap the cellophane around your candle for storage. If you prefer to leave it open, be sure to keep it away from any other potential sources of heat to prevent it from burning! Keep reading to know more about how to light a wooden wick candle.

Step 6 : Enjoy Your Wood Wick Candle!

After you finish, you will have your own wooden wick candle that can be used for up to 10 hours. You can then extinguish the flame and save it for another day or relight it with ease.

Wood wick candles are excellent for when you need to keep the flame only lit for a short amount of time. They also burn cleanly and can be used in windy conditions without much risk.

You can check it to Turn Off Abs Light Jeep Wrangler

How To Clean Up A Wood Wick Candle?

1.Use a Butter Knife :

  After the candle has completely cooled, use a butter knife to remove the hardened wax.

2. Use Ice Cubes :

Freeze water in an ice cube tray and then break the cubes into pieces that are roughly 1/4 inch thick. Gently rub these wood wick candle-making supplies over the surface of your candle to scrape away any excess wax.

3. Use a Paper Towel : 

Dip a paper towel into the hot water and hold it over the surface of the candle. The heat from your hand will help to liquefy any wax that’s still stuck, which you can then wipe away with a paper towel.

4. Use a Dryer Sheet :

Another way to remove melted wax from candles is with a piece of a used dryer sheet. This cleaning method is especially useful if you’ve soaked the candle and it’s still not clean enough to suit your tastes.

5. Use a Cotton Swab :

You can also use a cotton swab or old toothbrush to remove the wax. Dip either item into one of the hot water methods listed above and gently rub the wax away. You only need your wooden wick candle-making supplies for this task. If it’s your first time lighting one of these candles, there are a few things that will help make the process easier.

6. Use a Candle Scraper :

If you’re looking for an effective way to clean up your wooden wick candles, a candle scraper is a great option. These tools are specifically designed for this purpose, so you shouldn’t have any trouble finding one at your local home goods store.

7. Use an Old Toothbrush :

To remove wax build-up from your candle, dampen the bristles of your toothbrush with hot water and rub it over the affected area. This method works best for small areas of wax build-up.

8. Use a Razor Blade :

To remove any stubborn patches of wax left behind after cleaning with all other methods, try using the edge of a sharp razor blade. Just make sure you do this only after the candle has cooled down.

9. Use a Tongue or Lip Balm Stick :

Using your finger is the easiest way to clean up these candles. If you don’t have any on hand, though, try using a piece of wax from an old candle as a substitute.

You Can Check It Out to Light a Citronella Candle Inside

How To Trim Your Wood Wick Candle?

There are several different ways to trim your wick on wooden wick candles.

Trimming Wood Wick Candle

When the candle has finally finished burning, right before you extinguish it, use scissors to trim the excess wick so that there is about 1/4-inch left above the wax. You can also use a sharp knife to first cut off as much of the wick as possible and then smooth over the top with your finger.

Frequently Asked Question

What Kind of Wax Should I Use to Light My Candle?

When choosing a wax to light your candle, you want to make sure that it is a fuel that will burn cleanly and not leave behind any residue or soot. The best type of wax to use for this purpose is beeswax.

What Are the Benefits of Using Wooden Candles Instead of Electric Ones?

The Benefits of Using Wooden Candles Instead of Electric Ones Are :

  • Wooden candles are better for the environment because they are made from sustainable materials.
  • Wooden candles are more aesthetically pleasing and can add a touch of elegance to any room.
  • Wooden candles produce a softer, more relaxing light than electric candles.

Conclusion

Lighting a candle is one of the easiest ways to create ambiance and enhance your home’s decor. Whether you’re looking for something chic, romantic, or just plain old-fashioned cozy, we have an assortment of candles that will help set the mood.

So grab some matches and light up! You can even buy the one you just learned how to light a wooden wick candle.

You may read it also – How to Reset Service Vehicle Soon Light

Photo of author

Dave Parker

Hi there, my name is Dave. I am 32 years old guy and had a fascination with lighting ever since I knew about LED lighting and strip lights. I have completed my bachelor's degree in electrical engineering and can understand the often complex topics in the field of LED technology. Lightow is where I share my findings, opinions, and recommendations. I hope this tips will enlighten you to the wonderful world of lighting!

Leave a Comment