Many people use bluetooth headphones to listen to music or take calls. But if you’re like me, sometimes the flashing light on the headphones can be annoying. In this article, I will show you how to turn off flashing light on bluetooth headphones. So, let’s get started!
As mentioned before, many people use Bluetooth headphones. The number one complaint about them is usually the flashing light powered by an LED light. If you ask someone who uses Bluetooth headphones what their least favorite feature is, you’re probably going to hear about it having something to do with the LED lights. If this happens to be your biggest problem, this article will help you fix that problem!
Summary: Turning off the flashing light on Bluetooth headphones typically involves disabling the pairing mode or turning off the headphones altogether. The flashing light usually indicates that the headphones are in pairing mode, searching for a device to connect to, or have an active connection. To turn off the flashing light, follow the steps specific to your Bluetooth headphone model, as outlined in the user manual.
Generally, to disable the pairing mode, press and hold the power or multifunction button on the headphones for a few seconds. The flashing light should stop once the pairing mode is deactivated, and the headphones are connected to a device. If you want to turn off the headphones, press and hold the power button until the headphones power down, and the flashing light is no longer visible.
Some Bluetooth headphone models may have a dedicated button for turning off the LED light; refer to the user manual for specific instructions. Keep in mind that the process may vary depending on the brand and model of your Bluetooth headphones, so it’s essential to consult the user manual for accurate guidance.
A Detailed Guide on How to Turn Off Flashing Light on Bluetooth Headphones
Step 1: Preparation
Before you start, make sure that your device is fully charged. Also, ensure that the flashing light on the headphone is in the “ON” state. If it’s already in the “OFF” state, there should be no preparation required.
If it’s still in the “ON” state even after turning it ON, try restarting the Bluetooth connection of your smart devices. According to some users, this has resolved their problem with flashing light not changing its mode from “ON” to other available modes like “OFF.”
Step 2: Change the Mode of The Flashing Light
If your headphones are still not turning off, try changing the settings of your Bluetooth connection.
Go to your smart device’s “Settings” menu and locate the Bluetooth options. In this menu, look for the headphones you are using. Once found, tap on them, and a window will be shown with several options like Battery level indicator, etc. Next, locate the option of “Flashing Light” and press on it. Finally, you can select one from three modes available in that particular headphone’s settings.
This is the mode wherein there will be no light flashing when music is playing in your headphones, even though a connection with a smart device has been established via Bluetooth.
Breathing – This is the mode wherein only one light will be turning on and off in a breathing manner or when it’s on standby.
When music is playing, the two LED lights on the headphones will flash alternately. When there is no music playing, both LED lights will be permanently on.
Step 3: Save Your Changes and Disconnect Your Headphone
Once you have successfully changed your headphone’s setting to either “Off” mode, “Breathing” mode, or “Both Lights” mode and saved your changes, you can disconnect your wireless headphones from your smart device by following these steps: If you are using an Apple device like iPhone, iPad or iPod Touch: Tap on the “Bluetooth” menu and select the option of “Forget this device.” Then, turn off your headphone.
After a few seconds, press and hold both volume buttons simultaneously for a couple of seconds until the light starts flashing or turning ON/OFF. Your wireless headphone will then begin searching for a smart device to connect with. When it finds one, just let go of the volume buttons and wait until it connects successfully to your phone.
If you are using an Android device, go to your Bluetooth setting by clicking on its icon at the top right portion of your home screen. Next, scroll down and look for your wireless headphone connection under “Available devices.” Once found, click on the “Connect” button, and wait until it connects successfully.
Step 4: Check if Problem is Solved or Not
Once your headphone has connected to your smart device successfully, see if the problem with the flashing light is already resolved. If it still has a flashing light and there’s no music playing in your headphones, try playing some songs and checking again.
Also, make sure that you don’t have any third-party volume changer app installed on your smart device like “Better Volume” for Android phones because this might affect the volume of sound coming from your headphone. If, when playing songs, your headphone’s lights are still flashing, then it’s time to contact the customer service of your wireless headphone brand. These steps will help in how to turn off flashing light on bluetooth headphones.
Additional Tips
- Hold the power button of your headphones until it turns off completely.
- If you wish to pair or connect your headphones to another device.
- After pairing and connecting successfully, switch on your headset, and it will not flash again.
- If the light keeps flashing and you can’t turn it off, contact customer service for help.
- If the headset has been connected to another device before and it shows up when you try to pair with a new device, delete pairing by pressing OK or holding down the power button on your headphones until the red light goes solid then start over pairing process.
- If you have a warranty on your headphone, you may be able to get a How-To guide from the manufacturer’s website.
How do I disable the flashing LED indicator light?
Most likely, you have a malfunctioning unit, and it has been placed as out of warranty. In this case, there is no straightforward way of disabling the flashlight except for buying another device or using another pair until the old one is fixed.
If your headset flashes when connected to nothing at all, or if it randomly flashes like it’s trying to connect to something constantly (even though you haven’t signaled anything), try these things first: -Charging your headset; some headsets need more power than others, and they will give you an error message if they’re running low on juice before they fail to work.
Make sure you’re not inadvertently hitting the button on your unit; try locking your phone, for example, if it’s an android. -Check to make sure that no apps are running in the background that might be pushing information to your headset (for Android users, this is called “Applications Manager”).
If all else fails, you will need either another Bluetooth headset or one of the following options:
- Purchase a new wireless headphone set.
- Use another pair of headphones until yours can be repaired under warranty or replaced under warranty.
- Disable the flashing LED with a quick run to your local Radio Shack or a similar store.
FAQs
What Is a Blinking Led and Why Does It Flash?
Bluetooth devices are one of the most convenient tools for listening to music, watching videos, and even making phone calls. There is a chip with many components that help it perform different functions in a Bluetooth device. These chips use battery power to operate, making them have short life spans if not changed regularly. When the Bluetooth device is being used, this LED light blinks whenever data is being transferred from the source to the receiver.
Once a connection has been established between two devices with Bluetooth®, data can be transmitted wirelessly between them within a distance of 32 feet or less. For example, you’re playing some music on your smartphone, but you don’t want to do it anymore, so you press “Stop.” Now, the data streamed from the source has to be sent back, which requires power. That’s why this tiny LED light blinks and gives you a sign that it is working and transferring files back and forth.
When the Bluetooth® device is not in use, and there are no users connected, this LED light will stay on until it goes off completely. It means that your Bluetooth® device has finished resetting itself or its battery died out. Once you turn on your Bluetooth® device, make sure you’ve done all your settings correctly before sending or receiving any file with it.
Why Are My Bluetooth Headphones Flashing Red and Blue?
Some Bluetooth devices come with a flashing light, which lets you know that it is working, but it can be unpleasant in some situations. Many wireless headphones come with a flashing light to indicate that it’s transmitting audio wirelessly, but this feature can also be distracting when watching a video or trying to sleep. Here are instructions for turning off the flashing blue and red lights on most common brands of wireless headphones.
You Can Check It Out to: Turn Off Breville Descale Light
Conclusion
We hope this article on how to turn off flashing light on bluetooth headphones was helpful for you. The flashing light on your Bluetooth Headphones is a safety feature that alerts other drivers to the presence of a cyclist or runner. However, this can be distracting and annoying for those trying to stay focused while driving. Fortunately, it’s easy enough to turn off the blinking lights from within the settings menu on your phone!
You can also check it out: How to Avoid Ring Light Reflection in Eyes
