How to Bend Led Lights Around Corners

Led lights are a popular choice for many reasons. They are efficient, durable, and come in various colors and styles. However, one drawback to using led lights is that they can be difficult to bend around corners. This article will show you how to bend led lights around corners using a few simple tricks. Keep reading.

How to Bend Led Lights Around Corners

You may have noticed that most led lights come with a built-in clip or stand. This can be very helpful when bending the light around a corner. If your light doesn’t have a clip or stand, you can use some common household items to help you out. However, it is also important to remember that led lights are fragile and can be easily damaged. So, be careful when handling them.

Summary: Bending LED light strips around corners allows for a seamless installation, providing continuous and uniform lighting throughout a space. LED strips are flexible, making them adaptable to various applications and surfaces, but bending them requires proper technique to avoid damage to the strip’s circuitry or compromising the adhesive. The process involves creating a loop or folding the strip at a specific angle without affecting the LED components or cutting the strip unnecessarily.

To bend LED light strips around corners, first, identify the location where the bend is needed. Avoid bending directly on an LED or a solder joint, as this may cause damage to the strip or lead to a malfunction. Instead, bend the strip between the LED components, creating a small loop or fold that accommodates the angle of the corner. Ensure that the bend maintains a gentle curve to avoid putting stress on the circuitry or the adhesive backing. When bending the strip, do not twist or stretch it, as this may cause it to lose its adhesive properties or damage the internal wiring.

For LED strips with cutting lines or designated bending points, utilize these features to create clean, precise bends. In cases where the strip is not flexible enough to accommodate a tight corner, consider using connectors or additional sections of LED strip to create the desired angle. By following these guidelines, you can achieve a professional-looking installation that navigates corners smoothly and preserves the integrity of the LED light strip.

What are LED lights

LED, or light-emitting diode, technology has been around for years, but only recently has it begun to be used extensively in lighting applications. An LED is a semiconductor device that converts electrical energy into visible light. When electricity is applied to an LED, electrons recombine with holes within the device, and energy is released in the form of photons. This process is called electroluminescence, which makes an LED light up.

Things You’ll Need

  • Measuring tape
  • Level
  • Marker
  • Straight edge
  • Jigsaw with a fine-tooth blade
  • Goggles
  • Sandpaper
  • Clamps (optional)

A Stepwise Guide on How to Bend Led Lights Around Corners

Step 1: Before You Start

Led lights are a great way to add extra lighting to your home, and they can be bent around corners relatively easily. However, there are a few things you need to keep in mind before you start.

First, make sure you have the right tools for the job. You’ll need some wire cutters, pliers, and a soldering iron.

Need Soldering Iron

Second, always use caution when working with electricity. Please make sure all of your cords are adequately insulated and never touch the metal parts of the light fixtures while plugged in.

Finally, consult a professional if you’re not comfortable doing this yourself. There’s no shame in admitting that you’re not up for the task – after all, that’s what professionals are for!

Step 2: Measuring and Cutting the Strip

After choosing the length of LED strip light that you need, it is time to cut it to size. You will want to measure and mark where you need to cut the strip light. Be very careful when cutting LED strip lights as they are very thin and can be easily damaged. Use a sharp blade and make sure your cuts are straight.

Once you have cut the strip to size, it is time to bend it around the corner. You will need to use a heat gun or hairdryer to do this. Gently heat the area around the corner that you want to bend. Be careful not to get the LED strip too hot, or it may damage the light emitted. It would be best if you only heated the LED strip for a few seconds at a time.

Once the area is heated, slowly bend the LED strip around the corner. You may need to heat the area again if it cools down too quickly. Once you have bent the strip around the corner, allow it to cool completely.

Step 3: Connecting the Strip Lights

Now that you have your light strip, it’s time to connect it. This is a straightforward process. First, remove the adhesive backing from the strip light. Be sure to do this on a hard surface like a counter or table, as the adhesive is powerful and will stick to your fingers. Then, find the nearest outlet and plug in your light strip. Once it’s plugged in, flip the switch on the outlet and voila! Your light strip should now be working.

Remove the Adhesive Backing

Next, line up the light strip with the corner you want to bend it around. You may need to use a level or ruler to get it straight. Once you have it in place, press down firmly on the strip light for about 30 seconds. This will allow the adhesive to bond with the surface and create a stronghold.

Finally, use the included connector cables to attach each end of the light strip to the transformer. Plugin the transformer and turn it on to see your new light! You may need to play around with the position of the strip light a bit to get the perfect effect.

Step 4: Finishing Touches

Now that you have your light strip, it’s time to connect it. This is a straightforward process. First, remove the adhesive backing from the strip light. Be sure to do this on a hard surface like a counter or table, as the adhesive is powerful and will stick to your fingers. Then, find the nearest outlet and plug in your light strip. Once it’s plugged in, flip the switch on the outlet and voila! Your light strip should now be working.

Now that everything is straight and smooth, it’s time to enjoy your work! LED strips are a great way to add some extra light to your home, and with a little bit of creativity, you can bend them around any corner you like. Enjoy your new lighting! These steps will help you in how to bend LED lights around corners.

Tips and Tricks

LED lights are a good choice for people who want to save energy and money. They last a long time, but some people say they are hard to bend around corners.

The first thing you need to do is find the right LED light strip. Not all LED light strips are created equal, so it is essential to find one that is easy to bend. There are a few different factors you should look for when choosing an LED light strip:

  • The thickness of the strip: The thicker the strip, the easier it will be to bend around corners.
  • The type of material: Flexible strips are typically easier to bend than rigid strips.
  • The number of LEDs per meter: More LEDs per meter will make the strip more challenging to bend.

Once you have found the right LED light strip, it is time to start bending! Here are a few tips to keep in mind when bending your LED lights:

Time to Start Bending
  • Use a heat gun or hair dryer to heat the area you want to bend. This will make the bending process much more manageable.
  • Be careful not to overheat the strip, as this can damage the LEDs.
  • Start with small bends and gradually increase the degree of the bend until you reach the desired shape.
  • Use something round (like a dowel or PVC pipe) to help you achieve tight bends.
  • Use zip ties or adhesive tape to secure the strip once you have achieved the desired shape.

By following these tips, you should be able to easily bend your LED lights around any corner in your home.

Why Shouldn’t You Bend Your Led Light Strips

There are many reasons why you might be tempted to bend your LED light strip. Maybe you think it will make it fit better in that tight spot, or perhaps you think the curve will create a more exciting effect. But before you do, there are a few things you should know.

First of all, bending an LED light strip can shorten its lifespan. This is because the LEDs are subject to extra stress when they’re bent, which can lead to them burning out sooner than they would otherwise.

Second, bending the strip can also cause it to lose its brightness. When the LEDs are stressed, they can start to produce less light. This means that your light strip may not be as bright as before you bent it.

And finally, bending an LED light strip can also cause the colors to shift. This is because LEDs of various sizes produce different colors, and when you bend the strip, those different-sized LEDs can get out of alignment. Again, this can result in a strip that doesn’t produce the same colors as before. How do you fix this problem?

So, if you’re considering bending your LED light strip, think twice! It may seem like a good idea at first, but it’s not worth the risk in the long run.

Do Led Lights Attract Bugs

One common question people ask about LED lights is whether or not they attract bugs. The simple answer is that any light, including LED lights, can attract bugs. However, there are ways to reduce the number of bugs attracted to your LED lights.

Led Lights Can Attract Bugs

One way to reduce the number of bugs attracted to your LED lights is to use yellow or amber-tinted bulbs. Bugs cannot see the color red, so they are not attracted to these types of bulbs. Another way to reduce the number of bugs attracted to your LED lights is to ensure that the lights are not left on for long periods. Bugs are most active at night, so if you turn off your LED lights during the day, you will not have as many bugs attracted to them.

Finally, you can use bug zappers to get rid of any bugs attracted to your LED lights. Bug zappers work by using an electric current to kill the bugs that come into contact with them. They are a great way to keep your LED lights bug-free.

Why Can’t You Put Led Lights on White Walls

Led lights are a great way to light up a dark room, but there are a few things you need to know before you install them. For one, you can’t put led lights on white walls. The brightness of the light will wash out the color of the wall, and it will look like a big, bright light bulb is shining in the room.

If you want to use led lights in a room with white walls, you need to find a way to hide the light. One way to do this is to bend the light around the corner. This will create a soft, natural light that won’t overpower the other colors in the room.

You Can Check It Out to: Change Light Bulb in Nutone Bathroom Ceiling Fan

Frequently Asked Questions

Can You Bend Led Strip Lights Around Corners?

Can bend LED strip lights around corners easily by using a bending tool. You simply position the light at the desired angle and use the bending tool to gently curve it into place.

Using a Bending Tool

Is It Okay to Bend Led Lights?

It depends on the type of bend you are trying to make and the specific light fixture you are using. Generally speaking, if the bend is slight and does not affect the light’s functionality, then it is probably safe to bend the light. If, on the other hand, you are trying to make a more substantial bend that will damage or distort the light fixture, then it is not safe to bend the light. In these cases, it may be necessary to replace the light fixture.

Do Led Strip Lights Make Your Bill High?

They may actually decrease it by up to 25%. This is because LED strips use less energy than other light sources and last longer, so you’re not constantly having to replace them. Additionally, they are eco-friendly since they don’t produce wasteful heat or electronic waste.

So if you’re looking for a cost-effective way to improve the appearance of your home without spending a fortune on electricity bills, then an LED strip might be the perfect choice for you!

Can Led Strip Lights Cause a Fire?

LED strip lights can cause a fire if they are not properly installed and supervised. When LEDs are wired in series (ie. one after the other), they generate an electric current that could spark when two of them meet.

Led Strip Lights Can Cause a Fire


If you are looking for a unique and exciting way to light up your home, consider using bendable LED lights. These lights can be shaped to fit any space, providing a soft and inviting glow. With so many different colors and styles available, it is easy to find the perfect set of bendable LED lights for your needs. We hope you find this article on how to bend led lights around corners helpful.

Photo of author

Dave Parker

Hi there, my name is Dave. I am 32 years old guy and had a fascination with lighting ever since I knew about LED lighting and strip lights. I have completed my bachelor's degree in electrical engineering and can understand the often complex topics in the field of LED technology. Lightow is where I share my findings, opinions, and recommendations. I hope this tips will enlighten you to the wonderful world of lighting!

Leave a Comment