How to Change Rv Interior Light Bulbs

Replacing the light bulbs in your RV is an easy task that can be completed in just a few minutes. All you need is a screwdriver and a new bulb. This blog post will show you how to change rv interior light bulbs so that you can have bright lights again.

How to Change Rv Interior Light Bulbs

What Is an Rv Interior Light Bulbs?

An RV interior light bulb is a small, low-power light bulb that is typically used for illuminating the inside of an RV. These bulbs are designed specifically to work in areas with a tight, enclosed space, as they provide adequate but not overly bright illumination without overheating.

RV interior light bulbs last a long time, can work in hot or cold temperatures, and don’t break easily. You can put them in yourself without special tools.

Whether you need to replace an old bulb or want to add some new lighting fixtures inside your RV, an RV interior light bulb is sure to be a perfect choice.

Why It’s Important to Change Rv Interior Light Bulbs?

Changing the interior light bulbs in your RV is an important task that should not be overlooked. Without regular bulb replacements, you may find yourself in a dark and dreary space when you need to access things like your kitchen cabinets or bedside table.

Wire loom is a fabric sleeve that can be found at any auto parts store. It is designed to protect wires and hoses from abrasion and does a great job of hiding wires. Slip the wire loom over your light bar wires and secure it with zip ties.

By replacing your interior light bulbs regularly, you can keep your RV running smoothly and ensure that you always have the lighting you need for any situation. So don’t delay – next time you’re doing routine maintenance around the house, don’t forget to check those vital Rv interior light bulbs! They’ll thank you for it later.

Replacing Interior Light Bulbs

Required Materials

  • RV interior light bulbs
  • Phillips head screwdriver
  • Flathead screwdriver (optional)
  • Ladder (optional)

How to Change Rv Interior Light Bulbs Step by Step Guide

Step 1: Turn the Lights Off

To change your light bulbs, first turn off the power to the RV interior lights. You can do this by flipping the switch next to the light or by disconnecting the power cord from the RV’s main electricity source.

Step 2: Remove the Exterior of The Light

Now that the power is off, you can remove the light’s exterior. Depending on your RV’s model, remove a lens cover or screws or pull the light down from the ceiling.

Step 3: Remove the Old Bulb

In order to remove an old light bulb, you need to unscrew the lens cover and then the socket. Be careful not to drop or scratch the cover. The old light bulb will be attached to the socket.

Step 4: Insert the New Bulb

Carefully insert the new light bulb into the socket. Make sure that it is inserted correctly and not loose. If the new bulb does not light up, ensure that it is inserted correctly and that the old bulb is not still in the socket.

Step 5: Test the New Bulb

To install a new light bulb in an RV, first turn on the power to the RV interior lights. Then test the new light bulb by turning on the RV interior light fixture switch. If the new light bulb does not work, check to see if it is properly installed. If it is properly installed and still does not work, you may need to replace the entire RV interior light fixture.

Turn on the RV Interior Light Switch

Step 6: Close Up the Fixture

Once you have tested the new light bulb and it is working, close up the RV interior light fixture by screwing the cover back on. Make sure that the cover is tight so that water and other elements cannot get into the fixture and cause damage.

Step 7: Discard the Old Unwanted Bulb Properly

It is time to dispose of the old unwanted ones properly. Do not just throw them in the trash can as this is considered hazardous waste and is bad for the environment. Instead, take them to a local recycling center that accepts fluorescent light bulbs.

If you cannot find a recycling center, contact your local waste management company to see how they recommend disposing of it.

Step 8: Enjoy Your New Lighting

Now that you know how to change rv interior light bulbs, you can enjoy your new lighting. However, consider upgrading to LED bulbs if you find that the new bulbs are not as bright as possible. These are more expensive, but they last much longer and are brighter than traditional light bulbs.

How Do You Remove the Lens Cover on An Rv Light?

If you’re reading this, you’re looking for an answer to the question: how do you remove the lens cover on an RV light? It’s a pretty simple process, but it can be made a bit more difficult depending on the type of RV light you have.

If you have a standard incandescent RV light, the lens cover is usually held in place by a few small screws. These screws can usually be found along the edge of the lens cover and can be removed using a Phillips head screwdriver. Once the screws are removed, the lens cover should come right off.

However, if your RV light is of the LED variety, the lens cover is likely held in place with either snaps or magnets. In either case, pry the lens cover off gently until it comes loose. Then, with a little bit of patience, you should be able to remove the lens cover from any RV light without too much trouble.

Use a Phillips Head Screwdriver

How Do You Change the Puck Light on An Rv?

Changing the puck light on an RV can seem like a daunting task. With so many different components and wires involved, it can be difficult to know where to start or what to do. However, with a little bit of patience and careful attention to detail, you can easily change out the puck light on your RV.

The first step is to locate the circuit breaker for the light in question. This will usually be within easy reach of the lighting fixture in question. Once you’ve found the breaker, make sure it is in the off position before moving forward.

Next, you’ll need to remove the existing puck light bulbs from their sockets. Depending on your particular model of RV, this may involve unscrewing a simple finial lid from the top or completely removing a glass globe from its frame.

Once you have access to the bulb holes at the bottom of each puck light fixture, carefully pull each bulb out by its pins until they are entirely free from their holders. Take care not to touch any exposed wiring while doing this step!

Finally, replace each bulb with a new one of equal wattage and reinstall all parts just as they were taken apart. You should now be able to turn on your breaker and enjoy your newly lit RV space! Keep reading for more information about how to change rv interior light bulbs.

How Do You Upgrade Rv Lights?

Upgrading the lighting in your RV is a great way to boost both style and functionality. There are several options to consider, depending on your lighting needs and aesthetic preferences. Some popular upgrades include installing new LED lights, adding motion-activated lighting fixtures, or upgrading to energy-efficient bulbs.

No matter what type of RV you have, there are many ways to enhance the existing lighting system and create an even more comfortable and enjoyable experience on the road. So if you’re looking for new and exciting ways to improve your RV lights, start exploring all the exciting options today!

How Do You Change Led Lights on An Rv?

Replacing the LED lights on an RV is a relatively simple process that can be completed in minutes. The first step is to find the appropriate replacement bulbs. These can be purchased at most hardware stores or online retailers.

Once you have the new bulbs, locate the existing fixtures and remove the old bulbs. To do this, twist the bulb counterclockwise until it comes loose from the socket. Next, please insert the new bulb into the socket and twist it clockwise to secure it in place.

Finally, turn on the power to test the new bulbs. If they do not work, check the connections to ensure they are tight and free of any debris. With a little time and effort, you can easily change the LED lights on your RV and enjoy enhanced visibility on your next road trip.

Frequently Asked Question

Can You Replace Rv Bulbs with Led?

You can replace RV bulbs with LED by removing the old bulb and replacing it with the new LED bulb. Make sure you match the voltage and size of the LED bulb to the one you are replacing.

Replace RV Bulbs

What Type of Light Are Best for Rv?

One of the questions people often ask is what type of light is best for an RV. There are a few things to consider when making this decision. The most important factor is the wattage of the bulb. You’ll want to choose a bulb that is equal to or less than the wattage of the original bulb.

You Can Check It Out To Hide Light Bar Wires


Changing an RV interior light bulb is a quick and easy process that anyone can do. All you need is a screwdriver and a new light bulb. Ensure to replace the light bulbs in your RV regularly to keep it running safely and efficiently. Thanks for reading our post about how to change rv interior light bulbs.

Photo of author

Dave Parker

Hi there, my name is Dave. I am 32 years old guy and had a fascination with lighting ever since I knew about LED lighting and strip lights. I have completed my bachelor's degree in electrical engineering and can understand the often complex topics in the field of LED technology. Lightow is where I share my findings, opinions, and recommendations. I hope this tips will enlighten you to the wonderful world of lighting!

Leave a Comment