How to Change Trunk Light Bulb

Replacing the trunk light bulb in a car is a quick and easy task that anyone can do. This guide will show you how to change trunk light bulb in your car. Whether you are doing it for the first time or replacing a burnt-out bulb, follow these instructions to get the job done quickly and easily.

How to Change Trunk Light Bulb

Why Should You Need to Change the Trunk Light Bulb?

There are a few reasons you may need to change the trunk light bulb in your car. One reason may be that the bulb has burnt out and needs to be replaced. Another reason may be that you are experiencing problems with the trunk light, such as it not turning on or staying on. If you are experiencing any problems with the trunk light, it is best to replace the bulb to see if that fixes it.

What You Will Need

You will need a few tools and materials to change the trunk light bulb. First, you will need a new light bulb. You can find this at any auto parts store or online. Second, you will need a Phillips head screwdriver. Third, you will need a putty knife or something similar to pry off the lens cover.

How to Change Trunk Light Bulb Step by Step Guide

Step 1: Pop the Hood

First, you’ll need to pop the hood of your car. Do this by pulling the release under the dash or near the driver’s side door.

Step 2: Locate the Trunk Light

The trunk light is located near the back of the trunk, near the license plate. There should be a small cover on the light that can be removed to access the bulb.

Step 3: Remove the Bolts that Hold the Light in Place

To remove the trunk light, you will need a wrench or a socket set. The top bolt is located at the top of the light, while the bottom bolt is located at the bottom.

If your car trunk light is held in place with screws instead of bolts, you can remove them using a screwdriver.

Once the bolts are removed, the light should come out easily. If it doesn’t, make sure that all connectors are disconnected and try again.

 Remove the Bolts That  Hold the Light in Place

Step 4: Remove the Trunk Light Housing

Most trunk lights are secured in place with two bolts. One bolt is located at the top of the light, while the other is located at the bottom. To remove these bolts and take out the light, you need a wrench or a socket set.

Step 5: Replace the Old Light Bulb

Once you have the new light bulb, it is time to replace the old one. Reach into the trunk and unscrew the old light bulb. The old light bulb will likely be very hot, so be careful when handling it. Screw in the new light bulb and replace the lid to the trunk. Test out your new light bulb by opening and closing the trunk. You should now be able to see clearly in your trunk no matter what time of day it is.

Step 6: Return the Trunk Light Housing Back Into Place

Push the trunk light housing back into place. Make sure that it is firmly seated and does not wiggle around. You may need to readjust the lens or the housing itself if it does. Once everything is in place, replace the two screws you removed in Step 4.

Step 7: Check that The Light Works

Close the trunk lid and turn on the car. Activate the trunk light by pressing the button on the center console, key fob, or opening the trunk. You have successfully installed a new trunk light bulb if the light comes on. If not, consult your car’s owner manual or take it to a professional mechanic to have it checked out.

Step 8: Put Everything Back Together and Close the Hood

Now it’s time to put everything back together. Be careful not to pinch any wires or cables as you put the trunk lid back in place. Make sure the light bulb is securely fastened in place and close the hood. Test the light bulb by turning on the headlights. If it doesn’t work, recheck all of your work to ensure that you haven’t made any mistakes.

Replacing a trunk light bulb is a simple process that can be completed in just a few minutes. By following these eight steps, you can have your trunk lit up like new.

Now that you know how to change a trunk light bulb, you can save yourself some money and do it yourself. Replacing this light bulb is a simple process that can be completed in just a few minutes. Be sure to follow these eight steps closely to ensure a successful installation. Keep reading for more information about how to change trunk light bulb.

Replace the Old Light Bulb

Other Reasons for A Bad Trunk Light

It is possible that the light bulb may not be functioning or has been blown. Here are some other reasons:

The light bulb isn’t fitted in properly

There is a chance that the light bulb isn’t screwed in, or it may be loose. This can cause the light to flicker or not come on at all.

Trunk Light Switch

The trunk light switch is located in the trunk, usually near the latch. It may be necessary to open the trunk to access the switch. If the switch is damaged or not working properly, it will need to be replaced.

Filthy or Rusty Contacts

You may have a bad connection if your contacts are filthy or rusty. First, check to see any corrosion on the bulb or the socket. If so, clean it off with a wire brush.

Filthy or Rusty Connector

If the connector of your trunk light is filthy or rusty, it might not make good contact with the bulb. This will cause the light to flicker or not work at all.

Check if the connector is making good contact with the bulb. If not, clean it with a wire brush and some alcohol. You can also try sanding it down to make it smoother.

Bad Fuse

There is a possibility that the fuse for the trunk light may have blown. To check, open the hood and locate the fuse box. The fuse box will be near the battery or in the engine compartment. The box will have a diagram telling you which fuse corresponds to the trunk light. If the fuse is blown, replace it with a new one of the same amperage.

Broken or Damaged Wire Installation

This is a very common reason for the light not to work. The wiring could have come loose or been damaged during installation.

You Can Check It Out To The Power Rating on a Light Bulb Describe

Is It Ok to Leave the Trunk Open?

Leaving the trunk open is common, but it’s not always safe. There are a few things you should consider before leaving your car open.

The first thing to remember is how long you’ll be gone. If you’re going to be out for a few minutes, it’s probably not worth the hassle of closing the trunk. However, if you’re going to be gone for a while, it’s best to close the trunk. This will prevent anyone from being able to access your belongings.

Leaving the Trunk Open is Common

It’s also important to consider the location of your car. If you’re in a safe area, like a garage or parking lot, there’s less risk of someone breaking in. But if you’re parked on the street, it’s important to be more careful. There’s a higher chance of someone stealing or vandalizing your car if it’s left open.

So, is it ok to leave the trunk open? It depends on the situation. If you’re going to be out for a few minutes, it’s probably not worth the hassle of closing the trunk. But if you’re going to be gone for a while or in a risky location, it’s best to close the trunk. This will help keep your belongings safe. If you want to know more about how to change trunk light bulb, keep reading.

Frequently Asked Question

Where Is the Trunk Light Located?

The trunk light is located in the vehicle’s rear, near the taillights. It is usually mounted on the underside of the trunk lid or the side of the trunk wall.

Why Is My Trunk Light On?

The trunk light is on when the car is turned off for two reasons. It could be that the light is on because it’s been triggered by the keyless entry, or it’s on because it’s part of the interior lights setting. If you want to make sure the trunk light turns off when you turn the car off, you can adjust the keyless entry settings.

Does Leaving Your Trunk Open Drain Your Battery?

Many people believe that leaving your trunk open will drain your car battery. However, this is not the case. People think this happens because they see the little red light on the dash that indicates the trunk is open. However, this light doesn’t use much power and won’t significantly affect your battery. So, if you’re worried about draining your battery by leaving your trunk open, don’t be!

How Do I Open My Trunk Without Killing the Battery?

If you have a trunk release button inside the car, use it to open the trunk. If you don’t have a trunk release button, open the car door and locate the release lever. Then, push down on the lever and pull up on the trunk lid.

What Happens if You Leave Your Car Door Open All Night?

Leaving your car door open all night can result in a lot of theft. Cars are often broken into because people leave their belongings in plain sight. Additionally, if you have an alarm system and don’t close your car door properly, the alarm might not go off. The best way to protect your car from thieves is to not leave anything in plain sight, and make sure you close your door correctly every time.

You Can Check It Out To Make Led Tail Light

Conclusion

It Can Be Done in Just a Few Minutes

Changing a light bulb may seem like a daunting task, but it can be done in just a few minutes with the right tools and instructions. Follow these simple steps to change your trunk light bulb, and you’ll be on your way to seeing better in no time. Thanks for reading our post about how to change trunk light bulb.

You can check it out to Wire a Photocell to Multiple Lights

Photo of author

Dave Parker

Hi there, my name is Dave. I am 32 years old guy and had a fascination with lighting ever since I knew about LED lighting and strip lights. I have completed my bachelor's degree in electrical engineering and can understand the often complex topics in the field of LED technology. Lightow is where I share my findings, opinions, and recommendations. I hope this tips will enlighten you to the wonderful world of lighting!

Leave a Comment