How to Hide Extra String Lights

Extra string lights can be a bit of an eyesore when they are not used. Here is how to hide extra string lights when they are not used. Hide your extra string lights by winding them up and storing them in an old tissue box or coffee can. This will keep them out of sight and organized until you need them again.

Summary: Hiding extra string lights can be a useful way to maintain a clean and aesthetically pleasing display while still utilizing the full length of the lights. Start by assessing the area where the string lights are installed and determining the most inconspicuous location to store the excess length. This can be behind furniture, plants, or other decorative elements, or in areas where the excess lights will not be easily visible.

Once an appropriate hiding spot is identified, neatly coil or bundle the extra string lights to minimize their appearance. Use zip ties, twist ties, or soft cloth bands to secure the bundle in place, ensuring that it remains tidy and does not interfere with the desired lighting display.

If the hiding spot is located higher up, such as on a wall or a beam, use hooks or adhesive clips to hang the bundled lights out of sight. In some cases, it may be possible to creatively incorporate the extra lights into the display by doubling up or looping sections of the string lights, adding depth or interest to the overall design. When hiding extra string lights, always ensure that they remain easily accessible for maintenance and that no strain is placed on the electrical connections.

What Is an Extra String Lights?

An extra string of lights is a set of lights connected to an existing string of lights. The new string of lights can be connected to the existing string of lights in several ways, including using a splice, pigtail, or T-connector. Extra string lights are often used to extend a light string’s length or add additional light sources to a display.

You can also use extra string lights to replace burned-out bulbs in an existing string of lights. When adding extra string lights to an existing set, it is important to ensure that the two sets are compatible and that the new string of lights does not exceed the maximum load for the existing string.

Why Should You Hide Extra String Lights?

Hiding your string lights is a great way to make your home look nicer and more polished. It also helps to prevent accidents.

Bulbs that are left exposed are more likely to be broken, and cords left in the open can pose trip hazards. By taking the time to hide your string lights, you can create a safer environment for your family and friends.

Required Materials

  • Scissors
  • Tape measure
  • Permanent marker
  • Ruler or a straight edge
  • Lightweight string lights
  • Extension cord (optional)
  • Wireless remote control (optional)

How to Hide Extra String Lights Step by Step Guide

Step 1: Plan Where You Want to Place Your String Lights

The first step in hanging string lights is to decide where you want to put them. This will help you figure out how many and what kind of lights you need, and how to best hide the cords.

Place the String Lights

Step 2: Choose Your Lights

You’ve got two main choices here – incandescent or LED. Incandescent lights are the classic choice, and they’re still a great option if you want that warm, inviting glow. However, they can be a bit of a power hog, so if you’re looking to save some energy (and money), LEDs are the way to go. They’re also more durable, so you won’t have to replace them often.

Step 3: Pick a Power Source

Once you’ve decided on your lights, it’s time to choose how you’ll power them. Battery-operated lights are a great option if you’re only doing a small display. But if you’re doing something more substantial, you’ll probably want to opt for plug-in lights. Just be sure to pick a power source appropriate for the number of lights you’re using. Organize your lights on the ground first. You don’t need to attach them to anything at this point, but it’ll help you visualize what you’re doing. Once you’ve got a plan, start hanging the lights by attaching them with zip ties or other fasteners. If you’re using plug-in lights, now’s the time to connect each light string to its power source. It can be helpful to do one line at a time so you don’t get confused.

 Battery-operated Lights Are a Great Option

Step 4: Hang Your Lights

Now it’s time to hang your lights. If you’re using incandescent bulbs, use only UL-listed lights and cords. When hanging the lights, be sure to leave some slack so that you can adjust the placement of the bulbs later. And always use insulated staples or hangers to secure the cords in place.

Step 5: Attach the Bulbs

Once the cords are in place, it’s time to attach the bulbs. Start by screwing in the end cap (if your lights have one), and then screw in the bulbs. Be sure not to overtighten the bulbs, as this can cause them to break.

Attach the Bulbs

Step 6: Cut a Small Slit in The Fabric

Once the bulbs are in place, you’ll need to cut a small slit in the fabric so that you can thread the cord through. Start by cutting a small hole in the center of one of the fabric panels. Then, working from the panel’s backside, thread the cord through the hole.

Step 7: Thread the String Light Through the Slit

Now it’s time to thread the string light through the slit. Start by holding the string light up to the fabric panel so that the end with the plug is at the top. Then, insert the string light into the slit and gently pull it through.

Step 8: Tie a Knot in The String Light

Once the string light is through the slit, tie a knot in the cord to secure it in place. Be sure to leave a few inches of slack so that you can adjust the placement of the lights later.

Step 9: Now Hide the Extra String Light

Now that the string light is in place, you can hide the extra cord by tucking it under the fabric panel. Start by finding the end of the cord with the plug. Then, gently tuck the cord under the fabric panel and pull it through.

Step 10: Call a Professional

Hiding your extra string lights doesn’t have to be a difficult task. However, consider calling a professional if you don’t feel comfortable doing it yourself or don’t have the time. A professional will be able to quickly and easily hide your string lights, ensuring that they look great and stay hidden.

Now that you know how to hide extra string lights be sure to take advantage of these tips and tricks to make sure they look great and stay hidden. By following these simple steps, you can ensure that your string lights are well-hidden and add a touch of holiday cheer to your home.

You Can Check It Out to Hang String Lights on Screen Enclosure

How to Make a Wireless Extra String Lights

Don’t you hate it when you’re trying to enjoy a beautiful string of lights, but the cord gets in the way? Well, there’s no need to be frustrated any longer! You can easily make your wireless string lights with a few simple supplies.

You’ll need A string of lights, a hot glue gun, and a wire coat hanger. First, straighten out the coat hanger and cut it into pieces about 6 inches long.

Then, use the hot glue gun to attach the coat hanger pieces to the back of each light. Ensure that the glue forms a secure bond; otherwise, your lights won’t stay in place. Finally, twist them together to form a long strand once you’ve attached all of the coat hangers. That’s it!

Use the Hot Glue Gun

You now have your very own wireless string lights. Now you can enjoy their beauty without worrying about tripping over cords or getting tangled up in knots. Keep reading for more information about how to hide extra string lights.

How Do You Hide Extra Christmas Lights?

One of the best things about Christmas is all of the lights. They can turn even the drab best house into a festive winter wonderland. But what do you do with all those extra lights when the holidays are over? There are a few different options for hiding extra Christmas lights.

One is to wrap them around a wreath or garland and store them in a closet. Another is to coil them up and tuck them into a storage bin. Or, if you have a lot of extra lights, you could donate them to a local school or church. Whatever you do with your extra lights, keep them safe and dry until next year.

How Do You Extend Led Christmas Lights?

One of the best things about LED Christmas lights is that they are very easy to extend. Most LED lights use a plug-and-play system, which means that all you have to do is connect the lights to an extension cord. However, there are a few things you need to keep in mind when extending LED lights.

First, make sure that the extension cord is rated for indoor or outdoor use, depending on where the lights will be installed. Second, pay attention to the wattage rating of the extension cord. If it is too low, it could cause the lights to flicker or dim.

Finally, wrap the connection points with electrical tape to prevent moisture from getting in and causing a short circuit. You can easily extend your LED Christmas lights without any problems by following these simple tips.

What Do You Do with Extra Length of String Lights?

Most people don’t know what to do with their extra string lights, so they throw them away. However, there are many creative and practical uses for those extra lights. For example, you can use them to decorate your home for the holidays or any special event.

You can also use them to add some ambiance to your outdoor living space or bring some light into a dark room or closet. In addition, extra string lights can be used to make unique jewelry or other crafts. So next time you have some extra length of string lights, don’t throw them away – put them to good use!

Can You Cut Off Extra String Lights?

Yes, it is possible to cut off extra string lights. String lights come in different lengths and sometimes a longer length of lights isn’t necessary for a particular decoration project. In such cases, it might be necessary to cut off the extra string lights to achieve the desired length.

To cut off extra string lights, first, identify the part of the string that needs to be cut. This may require measuring the string against the intended decoration location or simply eyeballing the length. Once the length to be cut off is determined, ensure that the lights are not plugged in.

Use a pair of sharp scissors or a wire cutter to cut the string lights at the identified spot. Be careful when cutting so as not to damage the wiring or bulbs. After cutting, wrap electrical tape or insulating tape around the now-exposed wires to prevent injury from exposed electrical components.

It’s important to note that cutting string lights may void their warranty or render them unsafe if done improperly. If in doubt, it’s advisable to seek out professional help or consult the manufacturer’s instructions. Nonetheless, with care and caution, it is possible to cut off extra string lights to achieve the desired length for specific decoration needs.

Frequently Asked Question

Can I Cut the End of String Lights?

If you want to hide extra string lights, you can cut the end of the string light. First, cut the end of the string light and then use a wire stripper to remove the insulation. After that, use a pair of pliers to twist the exposed wire together. Finally, use electrical tape to secure the connection.

Can You Shorten Patio String Lights?

You can shorten your extra string lights if you want to hide them. Cut the cord in half and then use some electrical tape to reattach the two ends. You can then plug the shortened string light into an outlet and cover the excess cord with a pot or plant.

Use Some Electrical Tape


If you’re looking for an easy way to hide your extra string lights, try using a garland. Garland is the perfect way to disguise your light strings and add some festive decor at the same time. Follow these simple steps to hang a garland and conceal your lights in no time! Thanks for reading our post about how to hide extra string lights.

You May Also Read: How to Install Light Bar on Roof

Photo of author

Dave Parker

Hi there, my name is Dave. I am 32 years old guy and had a fascination with lighting ever since I knew about LED lighting and strip lights. I have completed my bachelor's degree in electrical engineering and can understand the often complex topics in the field of LED technology. Lightow is where I share my findings, opinions, and recommendations. I hope this tips will enlighten you to the wonderful world of lighting!

Leave a Comment